Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
got ready to install my new wolverine Tech dual 24 and 12 volt altenators. i had Tim powder coat them green. the 12 volt will be wired into a battery box in my new M109a3 box i bought last weekend. i hope with more daylight after work i can make some progress. replace altenators, injection...
drove one of my M35a2s to get tires for my M52a2 from Fuzzy Toaster. great guy. i think i am going to have to change seals, gaskets or bearings in my steering gear box? niticed a new sound as i turned into my driveway. squeeks when i move the steering wheel just and inch or tow. add to the...
I put zipper boots on this one because i did not want to disasemble the front end. Both boots were cracked and the drivers side had a thumb size hole the was slinging grease but the truck is up and running other than that. i have the non zipper boots for my M109a3 that i plan to change the...
Replaced the batteries led light selector switch and flasher module in order to drive it to get the state inspection. Tested the lights and had a brake line blowout. not a brake hose the front rear axle right hand line shooting Dot 5 like a water gun. Another project on my to do list.
Had the leaking head gasket replaced on Corporal Lifton Tote. Then I put 2 new tires on the front and ordered a new horn button kit as his had a short to ground that kept running down the batteries.
Replaced both wind shields on Sergeant Ike Stormwater.
drive my M109a3 to a Ted Nugent Concert.
Oh yea, i also had to change the sensor on the front of the airpack. it started leaking and then shorted out and smelt like an electrical short and break fluid. while looking around under the truck i noticed i will need new brake hoses soon. i don't...
please let me know how hard it is to get them back in. i have the same project on my "TO Do List" to start a conversion. gathering parts now. :popcorn:
this is like going to the PETA web site and talking about how good the deer you shot last week tastes.
two new front tires and zip tied up the wires on the extra set of lights. moved the wires so when i have the low beams on only the low beams on the set of headlight is on in the A3 buckets...
i have a post "My M109a3 going 100% LED" that has the web site i bought them at. i think they are brighter but i don't have any proof.
http://www.steelsoldiers.com/deuce-modification-hot-rodding/76024-my-m109a3-going-100-led.html
i have had the see through green ones for years. the gauges...
converted all of my inside lights to LEDs along with my license plate light. already had LED taillights and headlights. working on the front LED turn signals and LED black out light. going 100% LED.
put one of my M35a2's on display at a local church that was having a 9/11 memorial service and was Honoring some local Veterans (one was a Vietnam Veteran). i had to work but she made it.
installed the winch, LED headlights and the brushguard. reconnected the LED tail lights after installing my new receiver hitch (several months ago) from wehring . i have him back on the streets today. still need cable and a hook.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!