Search results

Also remove the nuts and put on the never-seize put your nuts back on and adjust. If you ever make it too Sunny Beach Fl. stop and grab two NOS windshields.

Did you also know member Igor Chudov put together Liberated Manuals with if I had to guess 1000 of tm's. Thanks again Igor.

If I remember the last front left and right ones had the springs To bad I just trashed the front springs and bolts that you need for the flexing. Yea looks like someone just did a u bolt thing.

Maybe all the folding money you are throwing at the truck. No on anything in the Head to cause restriction.

Also the head over flow valve needs to open up some when at high Idle ( almost full rpm ) and that would cause the restriction. Know you said you checked it but any problem with restriction starts with the over flow valve.

Yea we talked about a restriction in the over flow valve or somewhere in the return line going back to the tank. Still believe removing the return line off tank and watch it with in tank running and then with truck running. I know you said you did all the fuel feed and return in Synflex. Is...

Yea they will run / idle with pressure so low your gage will not pick it up.

Give me a call when you can. Also with the valve out turn on in tank and see if any crud comes out. Try and place a rag / towel so as to catch and see if there is crud.