• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. J

    What have you done to your MTVR today?

    Just a note about this fix. It has been about a year and a half since I sprayed the rubber stuff on my cargo cover and now the rubber has turned hard and is flaking off. So this is not a long lasting fix but for a year it kept the rain out. This time I am trying the clear version of Flexseal to...
  2. J

    What have you done to your MTVR today?

    OH! And I am almost finished with a new home for the 7 Ton. A 30 by 62 foot building. I made it big enough to hold four 7 Tons but now with a bunch of other stuff in there it will only hold two.
  3. J

    What have you done to your MTVR today?

    I changed my engine oil for the first time and when I checked the drain plug magnet is was pretty clean. So that is good news.
  4. J

    What have you done to your MTVR today?

    Well, this is not actually about the truck itself but I did get a sixcon for fuel. It holds 900 gallons and bolts right to the 7 Ton bed with the ISO locks. So including the regular tank I could carry about 1,000 gallons of diesel. If I get about 6 miles per gallon, then I could drive about...
  5. J

    What have you done to your MTVR today?

    Great photos. Thanks for sharing. Sent from my SM-G988U1 using Tapatalk
  6. J

    What have you done to your MTVR today?

    Congratulations!!!
  7. J

    What have you done to your MTVR today?

    I also fixed two blue air hoses that were cracked and leaking. I have no idea what they are for because the truck worked fine even though they were leaking. They are next to the power steering reservoir under the hood.
  8. J

    What have you done to your MTVR today?

    I replaced the air hoses for the driver's air ride seat. I replaced the switch but the air hoses would pop off sometimes so I replaced them both with new.
  9. J

    What have you done to your MTVR today?

    I was poking around the other day and I found an emissions sticker on the engine. GP says there is no emissions sticker so maybe this one is not "official". To be official, maybe it needs to list the amount of pollution or something. Anyway, if you are in a state were emissions are required, you...
  10. J

    What have you done to your MTVR today?

    I drove to the desert again to warm up the transmission and see if dumping some Seafoam Trans tune in will help with the transmission shifting. When I got back I thought I would check all the temps and then record them for others to check out. I am not saying these are normal but some people...
  11. J

    What have you done to your MTVR today?

    Artisan, I found your post very condescending. Your attitude seems to be that you are right and I am wrong even though you know nothing about me, the situation, and did not ask me any questions. I am surprised that SS allows bulling like that. "That is an 80,000 lb rated towbar if I remember...
  12. J

    What have you done to your MTVR today?

    Success! The seat moves forward and back now and my wife is happy. Also, thanks to Elijah95 for the tip about the seat height switch. Switching the hoses worked.
  13. J

    What have you done to your MTVR today?

    I pulled my driver's seat. I was going to replace the air switch on the seat but when I looked underneath the seat, there are just 4 nuts holding it on. Well, in my case it was 3 because one was MIA. So I pulled it to see why it would not adjust forward and back. My wife has trouble driving the...
  14. J

    What have you done to your MTVR today?

    MTVR, I have counted 37 so far. Which is strange because I watched the video from the Marines about greasing and they did not seem to find that many. I guess I should watch the video again and count this time. Ha!
  15. J

    What have you done to your MTVR today?

    I found out what the access hatch behind the cab is for. I was going through and greasing everything and I could not get to the output shaft that goes into the transfer case. So I noticed that there was a panel right above the shaft so I took it off. This photo is looking down from behind...
  16. J

    What have you done to your MTVR today?

    I drove my 7 Ton out to the desert to get the tranny warmed up after changing the fluid. I wanted to get the transmission above 160 so I could be sure that the fluid was travelling through the cooler.
  17. J

    What have you done to your MTVR today?

    Thanks for the support Wes.
  18. J

    What have you done to your MTVR today?

    I finally had time to mount the period-correct tow bar.
  19. J

    What have you done to your MTVR today?

    I also took some time this week and fixed something that really bugged me. I did NOT like the back flap of the cargo cover always hanging down when I was trying to get into the bed of the truck. So I rigged up a system so I can pull up the back end of the cargo cover from the ground. If you look...
  20. J

    What have you done to your MTVR today?

    A couple of weeks ago I was watching a video from a Marine camp and it showed the inside of a 7 Ton with the cargo cover on. It had the seats but also had the back rests in place. I had thought the back rests were only installed when the cargo cover was not on. So I checked the TM and saw that...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks