• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. S

    My CUCV spin on fuel filter mod

    Should have some sort of a valve at the filter you can open for this purpose. I have a little petcock thing on mine. Personally, I just opened that valve and cranked it until fuel was coming out, then shut it. If it starts, that's okay, but I don't think it will. Don't crank it forever and...
  2. S

    My CUCV spin on fuel filter mod

    If you look in this thread starting around post #104 you'll see where I fought this same problem and asked for help.
  3. S

    My CUCV spin on fuel filter mod

    I almost gave up replacing the hose, but eventually was able to get it done by reaching in from behind. I can't remember all the details now, but it is possible without tearing everything apart. It may depend how big a guy you are and how flexible. ;)
  4. S

    My CUCV spin on fuel filter mod

    It's been a while, but I think it's just the stock mount plus a piece of flat plate aluminum. Mount the plate to the original bracket and the new filter mount to the plate.
  5. S

    My CUCV spin on fuel filter mod

    Either McMaster.com or at Ace Hardware. I think I got parts from both places. It's been a while so I can't remember exactly.
  6. S

    My CUCV spin on fuel filter mod

    Mine had two, the other one being the bleeder.
  7. S

    My CUCV spin on fuel filter mod

    Some Summit EFI hose I had laying around. Overkill for the application, but I already had it.
  8. S

    My CUCV spin on fuel filter mod

    Well, here's my new setup. Still haven't gotten it to start though, ran down the batteries filling up the filter since I don't have any diesel laying around. I don't foresee any problems outside of possibly chasing down a leak from the fittings. This is a Wix 33005 filter/water separator on a...
  9. S

    My CUCV spin on fuel filter mod

    Yup, my arm could fit in there as long as I laid almost completely prone across the engine bay to get my elbow far enough back. Still a PITA to tighten the new hose clamp with only one hand. Not sure how a big guy would accomplish this. Either way, job done. :beer:
  10. S

    My CUCV spin on fuel filter mod

    I'm having a hard time picturing this. How does the new hose get past the old hose?
  11. S

    My CUCV spin on fuel filter mod

    Sometimes they come through. How about the 1/4" though? By the way, anyone know how a person would go about replacing the 1/4" hose from the filter to the injector pump (I think that's what it is). The connection is totally buried under the intake. I can see it with a flashlight, but have no...
  12. S

    My CUCV spin on fuel filter mod

    Getting from 1/2" NPT to 1/4" or 3/8" barb is tough. Any suggestions where to buy? I found adapters at McMaster, but I have to buy a box of 5...
  13. S

    My CUCV spin on fuel filter mod

    How about this for the base: Wix 24770 & Napa 4770 Base: FleetFilter Secure Online Store and this for filter: Wix 33005 & Napa 3005 Fuel Filter Dual out makes for an easy way to make a bleeder. Seem okay?
  14. S

    My CUCV spin on fuel filter mod

    Great thread! I wish everyone was converging on one solution so I'd know what to buy. I like the simplicity of the last two NAPA setups people posted, but the lack of bleeding capability bothers me. My box filter is having problems and the easy bleeding is what keeps me going. If I'm in a...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks