Search results

I made a winch control lever to operate the winch from the front of the A3.

I 2nd the dirty coolant theory. Mine was crisp green and clean until I checked it after some off roading. It turned black with sediment. I flushed every portion of the cooling system replaced upper and lower rad hoses. Refilled with Peak antifreeze and it still came up dirty. Better but dirty...

I have Jatonkas winch cover. Love it. How do the auto drains work and install. Thanks. God Bless America

Coolant change and filter I thought my antifreeze/coolant was clean as it always appeared clear and green(think it was ethylene glycol) in the surge tank. Off roading last week and put my A3 through some vigorous hill climbing and descending. Brought it into my shop for a chassis lube...

Is that a "Who" Quadrophenia shirt on tank girl?

I removed the LED light bar that came with the truck. It can be easily reinstalled in a few minutes if I need it for camping, etc. It is 24V and very bright. I just did not like the way it looked. Bought some 3M sound deadening pads to experiment with on the interior. (Napa) Easy to cut and...

Thanks Good to know.

I bought these great lights from jcappeljr. I needed reverse lights and these look great and they are overbuilt. Was able to use existing holes in the crossmember to mount. I was going to power these from a toggle that I'd wire from the dash. A bit of research and looking around the truck and...

Issues with my Tach since I bought the truck. Seemed accurate at low RPMs but would pin at higher revs. Removed the tach sensor from the flywheel casing. It's pretty tight access. Removed the ether delivery assembly and the harness bands to free the wires from the sensor. Locking nut was not...

I replaced and rerouted the exhaust air line from the air assist steering to the intake. All parts were from the local big box store. Not sure what they were thinking with the OEM? hose. Changed both belts. The V belt was tricky. The Serp was very EZ. The fan clutch fitting was not fun. The...

I removed and relined the parking brake on my A3 yesterday and today (17-25 degrees outside). Disassembled yesterday, cleaned and sanded any rust. Removed old lining rivets with a handy cone shaped grinding head from Harbor Freight. Had to drill and slightly alter new linings to fit properly...

I replaced the air supply line to the Air Assist P/S and added a few ounces of MMO to the supply line. The steering has improved but no way I can one handed move the steering wheel when the truck is stationary. Replaced a few bad bulbs. NAPA has them but very pricey. Still trying to figure out...