Search results

I'll have to get a picture posted, but I haven't taken one yet. Look under accessories on Aubers website, and they make small black mounting boxes for these (this is what I used), and they worked great; I mounted them on the left side of the transmission shift tower. I can't remember the...

These are the gauges I installed, they work great and have built in alarm LED's with outputs for an audible alarm if desired. http://www.auberins.com/index.php?main_page=index&cPath=5_26

UPDATE: Finally did the "real" fuel adjustment... Holy crap! I backed it out about 2.5 turns and adjusted the "no air" screw, and this thing screams! I'm taking it easy on her and watching all the important gauges, but it's quite impressive compared to stock. Hills that I used to get passed on...

I've heard the tool costs about $200, but I could be wrong. I just took a 14mm & a 10mm deep socket and turned down the OD on the 10mm and bored out the ID on the 14mm; I'll either use vise grips for the 14mm or tack weld a tee handle on it, and use a regular 3/8" drive short extension with a...

Does a 200-300F drop pre turbo to post turbo sound about right? I've got my probe installed about 1.5" after the turbo where they recommended. Also, to do the real fuel adjustment you've gotta have a special socket inside a socket tool, I can post a couple pics of what I made if that's helpful.

Maybe he was just being extra cautious... What do you think would be safe continuous boost, and how about EGT's? I'm just learning as I go:-)

I installed my pyrometer and boost gauges, but I've only had time to make the rack adjustment shown on Low buck diesel power website... the actual fuel adjustment is proving to be a real pain; the screws have proved very difficult to get out on the back of the pump that hold on the tin cover. As...

I've put together a step-by-step guide to do this, so we'll see how it works out... Unfortunately, I don't have a dyno to give real HP number increases, however I do have this one darn hill that I know if I hit the bottom @ 60mph, I'm only doing 40mph when I reach the top... This will be my test...

Has anyone actually posted results on turning up the fuel on the 6CTA 8.3 Cummins in the A2? If so, I haven't found it... Which leads me to... I'm installing digital pyrometer and boost gauges today, then I'm going to turn it up and see what I can get out of my A2. I've done a lot of talking...