Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
For some reason I thought I remembered guys saying they had to drill that out. I am looking through past threads now.
OK, thread that I saved a while ago says if you have an anti-tamper bolt to cut an notch into it then use a chisel to loosen, or vice grips, basically whatever you can use to...
My buddy is an Allison mechanic with a large city contract and has been rebuilding Allison transmissions for well over 30 years. His advice to me, leave the engine alone so as not to blow up the transmission. He said exactly what you mentioned, they are about maxed out with the stock 8.3L...
Do shift points need to be adjusted? I installed 3k springs and if I manually shift the truck will sustain higher than stock RPMs but if 1-5 is selected the transmission shifts like it did normally before the gov springs.
Just finished installing 3k springs and adjusting the full rack screw and the low boost. Full rack was adjusted to where the small 10mm nut is a little more than half threaded on. I took the low boost screw 2 turns. Truck also has 5" exhaust off the turbo and dumps right in front of the...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!