Search results

Yes. 12 volts at the switch and the switch is good.

I haven't cut into the fuse box. Did check the 10amp brake light fuse - it is ok and there is power at the box. Next step check hazard switch. If that's ok I think I have an "open" wire somewhere... Fun

I have checked the brake switch - functioning properly (open when pedal is "up", closed when pedal is "down"). I will check that hazard flasher switch on the steering column next. Thanks again. Service light switch is turned on, all other lights functioning properly.

I used a multimeter to check for voltage. I used a PowerProbe to test the socket's (PowerProbe hooks up to the battery to power devices). With the multimeter I tried ground on the body at the tail lamp housing AND hooked a lead up to the negative post on the battery just to be sure. No voltage...

I lost power to my brake lights. All other lights are OK. After looking at the wiring manual, I checked the fuse box (12V at the terminal is OK, fuse is good) and the brake switch @ the pedal (brake switch functioning fine, 12V @ the switch is OK). Then I checked the sockets @ the lamp...