• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. cucvrus

    M1009 LED Problems

    I found this picture under Google images. CUCV Fuse Box Diagram. The Blue circled is the 30 amp fuse slot that get melted all the time. Mess with that and check out your fuse. I never used any headlamp wiring upgrades. If I had an issue with the melted fuse I cut the wires and replaced the fuse...
  2. cucvrus

    M1009 LED Problems

    After you have the fuse block split you will see one leg that supplies power. It's ben a few years since I corrected one of these for this issue. I just remember that 2 fuse holders were serviced from the power that I eliminated and spliced into. Once you get the box split you will understand...
  3. cucvrus

    M1009 LED Problems

    Common issue. You can split the fuse block and add an inline fuse. the melt is from an over loaded circuit and the heat was caused by the poor connection due to the overload. You will need 2 inline fuse holders to replace that leg of power on the fuse box. I also used a circuit breaker for the...
  4. cucvrus

    M1009 LED Problems

    30 amp.
  5. cucvrus

    M1009 LED Problems

    I'll stick with my Trucklite LED headlamps. They are the only ones that made my driving at night easier. They also lightened the load on the lighting circuit. I put LED's thru out my old Crown of Thorns M1009. Everything that had a bulb. Only thing I ever noticed was the head lamps. Sold that...
  6. cucvrus

    M1009 LED Problems

  7. cucvrus

    M1009 LED Problems

    Had the same problem with my M1009 when I did the convertion. The problem is the front fender side markers. The way the connectors for those markers is setup is that it has a 12v wire for the turn signal on one lead and a 6v park light source on the other lead. convertion.=conversion NOUN...
  8. cucvrus

    M1009 LED Problems

    The LED bulbs do not create enough resistance to activate the flasher cycle. Similar to when a bulb is out and the indicator just refuses to flash. I encounter this many times up fitting new truck chassis. We add new flashers if possible or place a resistor in line up stream from the light. Most...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks