Search results

The correct one will have two wires coming out of it. It will go to a Canon connector connected to about six feet of harness coiled under the truck and zip tied up. I thought my pressure switch was bad, so I ordered a new one. It actually turned out the Canon connector was bad. I just took the...

Are you getting four or five flashing lights? Four flashing seems to represent a problem with a sticking valve or a leak and five seem to represent an electrical component issue. If you are getting four flashing, try running the system in run flat mode. I have to put the system on mine in run...

@Cumminsbandit, what are the symptoms? Four or five flashing lights? Four lights indicate that the system cannot maintain pressure and five flashing lights indicate a problem with a CTIS electrical component. If you have four flashing lights, check all the air connections at the tire valves...

Here is a link to the troubleshooting guide: http://dana.com/wps/wcm/connect/25f359804b1f69fba8acfff859534476/DEXT-axts0015-0710_CTIS_TroubleshootingGuide_LR.pdf?MOD=AJPERES&CONVERT_TO=url&CACHEID=25f359804b1f69fba8acfff859534476

Make sure all the fitting at the tire fill valves are tight. Mine didn't work when I got the truck due to a defective pressure sensor on the wet tank outlet. Replaced it and it started giving me the 4 flashing lights. I reset the unit and then did a walkaround when it was running. Had air...

Not sure if this is the one I am looking for: Dana Spicer Tire Inflation Pressure Switches 673345 NSN 5930-01-446-9234 CTIS

The TM states that it is a 85-psi switch. Is there an equivalent part available and if so, where?

Hello Everyone. I am a new owner of a M923A2. I have got my CTIS to work by bypassing the pressure switch under the vehicle and tightening the fittings on the front wheels. The pressure switch seems to be bad. Question is, where can I get one of these pressure switches. It has a canon plug...