• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Deuce Coolant Hemorrhage (LEAK)

timntrucks

Well-known member
Steel Soldiers Supporter
4,041
116
63
Location
Ponchatoula LA
Drove deuce to a flag raising Saturday morning and once I got it parked out comes the water. So looks like lower radiator hose has a hole in it., I got it home before all the water ran out. I think I'll change out all the hoses on it. Any members suggestions on source.. I see some replacement numbers in the parts swap TMs. for the NAPA hoses. I think I should change the little shorts one too. Thanks for input on this.
 
Last edited by a moderator:

Tracer

Well-known member
Steel Soldiers Supporter
6,392
13,481
113
Location
Hawthorne, NV.
Yes I agree. Replace the little short hoses that go from the water pump to oil cooler 2, & water pump to thermostat housing 1. They can get overlooked, but they can go bad and leak just like the larger hoses.
 

jasonjc

Well-known member
5,325
283
83
Location
Gravette Ar.
I had to change mine the other day. I used a gates hose. The OEM hose had no reinforcement cords in it. I could peel it back like a curly fry.DSCN0529[1].jpgDSCN0524[1].jpgDSCN0527[1].jpg

I changed out the belts too. They looked like new from the top, but when I took them off.
 

timntrucks

Well-known member
Steel Soldiers Supporter
4,041
116
63
Location
Ponchatoula LA
ill take it apart this week and get some new hoses. we had a plaque dedication at same spot at 10.00 so i came back with 925a2for that.
 

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,120
113
Location
Athens, Ga.
I bought all of them at Napa. They're all standard straight hoses other than the lower. I trimmed a little off the lower and it fit fine. The Napa # is in the deuce civvy cross reference spreadsheet that's stickied at the top of this forum.

I would do ALL the hoses. Every single one. Do it all at once. If one failed, they'll all fail soon.

Clean any corrosion off the pipes or thermostat housing.
 

rustystud

Well-known member
9,071
2,388
113
Location
Woodinville, Washington
I also replaced all my hoses at the same time. I went with all silicone hoses except for the radiator hoses which I bought at "Eriks" . I still might replace the radiator hoses with some nice custom silicone hoses like Hank did. Silicone lasts so long I'll be dead and buried before they go bad.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks