• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Humvee rear differential shims and parts needed

Al Capone

Active member
358
37
28
Location
Pearl river la
I've heard bunch of times this is a model 20 basically rear diff . But also have found some listings for 1999-up h1 diff parts ? I want a ring gear shim kit so I can tighten up so slope and also bearings and seals . I've tried few vendors for the military part number shim kit and no luck . Can anyone give first hand experience on what shims they used for carrier ? My 998 is 1990
 

Al Capone

Active member
358
37
28
Location
Pearl river la
I've cross referenced carrier bearing numbers and such and found all them . And 76-86 cj7 jeep uses same carrier bearings , so in theory should use same shims . Better than the $223 am general shim
kit I did find !
 

Action

Well-known member
3,581
1,551
113
Location
East Tennessee
5579453 is the AMG set listed at LYNCH for $145.65.
Or, you can buy the specific shims you need (40 different thicknesses) from $3.85 - $6.58 each.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks