- 2,194
- 736
- 113
- Location
- Efland, NC
Anyone have a spare gear wrench they are interested in partying with? I’ve seen them in the classified section before but at that time I didn’t have a LMTV. 
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Looking for a gear wrench to use on LMTV lug nuts.
- Thread starter DieselAddict
- Start date
- 313
- 629
- 93
- Location
- Fairplay, MD.
I can’t think of what kind of wrench that is. Are you looking for a torque multiplier wrench, a large socket wrench/breaker bar, or?Anyone have a spare gear wrench they are interested in partying with? I’ve seen them in the classified section before but at that time I didn’t have a LMTV.
Have a picture of one? I’m curious.
- 2,194
- 736
- 113
- Location
- Efland, NC
Yea, I'm looking for a torque multiplier wrench.
- 5,362
- 2,288
- 113
- Location
- AZ/KS/MO/OK, varies by the day...
@maddawg308 had some at one time. Probably long gone.
It seems like something @gimpyrobb should have.
I have exactly one, and I like it a lot. You'd have to pry it out of my cold dead hands to get me to part with it.
It seems like something @gimpyrobb should have.
I have exactly one, and I like it a lot. You'd have to pry it out of my cold dead hands to get me to part with it.
- 2,194
- 736
- 113
- Location
- Efland, NC
If anyone has picked one up from a vendor that that they are happy with let me know.
- 4,733
- 1,030
- 113
- Location
- Metairie/La (N'awlins)
Ken tool is the manufacturer.
Napa sells ken tool. I am sure others also
www.kentool.com
Napa sells ken tool. I am sure others also
Power Wrench Sets – Ken-Tool
www.kentool.com
- 3,586
- 985
- 113
- Location
- North Carolina - FINALLY !
Chris I have one here that you can try out. Rarely if ever gets used once I got a Milwaukee 1/2” impact. Just a cheap knock off but works well.
- 9,435
- 926
- 113
- Location
- mid- michigan
Yep maddawg been out for a couple years
- 563
- 318
- 63
- Location
- Reydon, OK
I think I have one of the wrenches but not the bar and tube that goes with it.
- 4,733
- 1,030
- 113
- Location
- Metairie/La (N'awlins)
Those can be picked up at Napa individually as ken tool has a part number for each piece.
They use the 5 digits not the alpha part number.
Last edited:
- 4,051
- 107
- 63
- Location
- Ponchatoula LA
Bill W is his ss name had one for sale at the ga rally last year. i dont know if he sold it or not that is the correct name for here
Last edited:
- 181
- 16
- 28
- Location
- Gilroy, CA
I've got one I'd part with. Shoot me a pm
- 1,635
- 487
- 83
- Location
- Ostrander, Ohio
Are you still looking for one? Is it the same one that you use on deuce Budd wheels? I have an extra if it's what you need.
- 863
- 1,188
- 93
- Location
- Hidden Valley, Az
One flat with a 3/4" battery impact wrench, and you'll never go back.
If so, make sure you get the one socket that does both Budd nuts and thimbles.
My Harbor Freight job will do all the wheels on one charge.
DG
If so, make sure you get the one socket that does both Budd nuts and thimbles.
My Harbor Freight job will do all the wheels on one charge.
DG
TacMac2012
Active member
- 160
- 85
- 28
- Location
- Wallburg, NC
I have one. $100. Located in Winston Salem NC. Shipping would be a large or medium flat rate box.