M1009 parts available

cucvgoodbye

New member
1
4
1
Location
new hampshire
Here is a list of parts I scavenged off the truck before it was sent to the bone yard:

  • internal engine parts for a 6.5 non-turbo engine - no block - for IH block
  • head unit
  • dash unit
  • voltage gauge
  • rear seat
  • miscellaneous heavier gauge wire
  • wiper motor
  • pintle setup
  • rear latch (chrome)
  • underdash steering wheel cover
  • rear light setup that fits in the standard license plate area
  • secondary fuse panel

I live in Nashua New Hampshire 03063.

Free to a good home.

You will need to pay for shipping if you are not local.

I can send photos if you have a specific interest.

I've got a time window of about 2-3 weeks before the stuff gets tossed.

My best to all!!

My experience with the CUCV was very positive and I'm most grateful to those that manned it when they were in duty.

Howard
Best way to reach me is to send an email to:

h x c o f f m a n <at> p r o t o n m a i l . c o m
(no spaces)
 

Wagner

Member
46
0
6
Location
Old Saybrook, Connecticut
Here is a list of parts I scavenged off the truck before it was sent to the bone yard:

  • internal engine parts for a 6.5 non-turbo engine - no block - for IH block
  • head unit
  • dash unit
  • voltage gauge
  • rear seat
  • miscellaneous heavier gauge wire
  • wiper motor
  • pintle setup
  • rear latch (chrome)
  • underdash steering wheel cover
  • rear light setup that fits in the standard license plate area
  • secondary fuse panel

I live in Nashua New Hampshire 03063.

Free to a good home.

You will need to pay for shipping if you are not local.

I can send photos if you have a specific interest.

I've got a time window of about 2-3 weeks before the stuff gets tossed.

My best to all!!

My experience with the CUCV was very positive and I'm most grateful to those that manned it when they were in duty.

Howard
Best way to reach me is to send an email to:

h x c o f f m a n <at> p r o t o n m a i l . c o m
(no spaces)
I am would like the rear latch (chrome) if you still have it?

Wagner

PS: DM me if you have it & I will send you the postage.
 

CUCVGirl

New member
9
13
3
Location
Ehrenberg, AZ
Here is a list of parts I scavenged off the truck before it was sent to the bone yard:

  • internal engine parts for a 6.5 non-turbo engine - no block - for IH block
  • head unit
  • dash unit
  • voltage gauge
  • rear seat
  • miscellaneous heavier gauge wire
  • wiper motor
  • pintle setup
  • rear latch (chrome)
  • underdash steering wheel cover
  • rear light setup that fits in the standard license plate area
  • secondary fuse panel

I live in Nashua New Hampshire 03063.

Free to a good home.

You will need to pay for shipping if you are not local.

I can send photos if you have a specific interest.

I've got a time window of about 2-3 weeks before the stuff gets tossed.

My best to all!!

My experience with the CUCV was very positive and I'm most grateful to those that manned it when they were in duty.

Howard
Best way to reach me is to send an email to:

h x c o f f m a n <at> p r o t o n m a i l . c o m
(no spaces)
Would love to see photos of them all. I’ll try to email.
 

cucvmule

collector of stuff
Steel Soldiers Supporter
987
271
63
Location
Crystal City Mo
Here is a list of parts I scavenged off the truck before it was sent to the bone yard:

  • internal engine parts for a 6.5 non-turbo engine - no block - for IH block
  • head unit
  • dash unit
  • voltage gauge
  • rear seat
  • miscellaneous heavier gauge wire
  • wiper motor
  • pintle setup
  • rear latch (chrome)
  • underdash steering wheel cover
  • rear light setup that fits in the standard license plate area
  • secondary fuse panel

I live in Nashua New Hampshire 03063.

Free to a good home.

You will need to pay for shipping if you are not local.

I can send photos if you have a specific interest.

I've got a time window of about 2-3 weeks before the stuff gets tossed.

My best to all!!

My experience with the CUCV was very positive and I'm most grateful to those that manned it when they were in duty.

Howard
Best way to reach me is to send an email to:

h x c o f f m a n <at> p r o t o n m a i l . c o m
(no spaces)

Hello @cucvgoodebuy,

Are you still paying forward or have the parts gone rogue?

It would be great to know as it would be a shame to let any
mil-parts get turned into rebar.

How about an update?
 

Dispatcher7

New member
14
12
3
Location
Pittstown, NY
Hello @cucvgoodebuy,

Are you still paying forward or have the parts gone rogue?

It would be great to know as it would be a shame to let any
mil-parts get turned into rebar.

How about an update?
I can’t speak for the original poster, but I just picked up everything he had left. These parts will be used on my CD-1056 project. As I make progress anything left over or not needed will be re-posted here to continue the pay-it-forward.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks