M373A2 Wheel cylinders type?

[Floridianson]

6ton electric van. I going to pull the hubs but im thinking they are Deuce wheel cylinders. Also I might need a Master cylinder. Anyone had one apart or know about the master cylinder / wheel cyl. and if the master can still be had. Thanks

 

[RAYZER]

6ton electric van. I going to pull the hubs but im thinking they are Deuce wheel cylinders. Also I might need a Master cylinder. Anyone had one apart or know about the master cylinder / wheel cyl. and if the master can still be had. Thanks

I just went through the brakes on my m146 (6 ton axle).
If yours are the same the wheel cylinder rebuild kits will be 1 5/8", I have several dozen nos rebuild kits if you need some! The new wheel cylinders were hard to source but their out there.
I did not rebuild my master cylinder.
Now, if your axle is different, I may have just said all this for nothing.

 

[RAYZER]

Here's a couple pic's

 

[Floridianson]

So they are not the Deuce size. Great Thanks Ray

 

[RAYZER]

So they are not the Deuce size. Great Thanks Ray

Deuce wheel cylinders are 1 3/8" bore.

Edit: I know that you know that James!

 

[juanprado]

United 174 @ Napa $4

http://www.napaonline.com/Catalog/C...heel-Cylinder-Kit-Front/_/R-UBP174_0380026871