VA M939 series municipal snow plow mounts

Steel Soldiers is supported by:

Goinmxn

Member
Steel Soldiers Supporter
71
0
6
Location
Amissville va
Location , Culpeper Va. I have 2 plow mounts I made for my 931s. They have proven themselves time and time again. One uses a set of tabs I welded to the front cross member through the bumper and cradles the axle, the other uses the pintle hook mounts and cradles the axle, so no modifications necessary at all to the truck to mount. These mounts have hundreds and hundreds of push hours on them, no failures or wear on the front axle. Both cylinders work great. These were used here in the Blizzard of 2016, the trucks were unstoppable. I have 2 more that will be up for sale shortly as I take the snow equipment off the trucks. I will also be selling the belt driven hydro setups from 3 trucks as well that ran the sanders. Only reason I am getting out is the VDOT climate sucks, lower pay, more regulations and low bidders. I have been pushing snow for 20 years now, nothing compares to plowing snow in these trucks! $1300 each.



20200112_164043.jpg20200112_164039.jpg20200112_164044.jpg20200112_164047.jpg20200112_164053.jpg20200112_164055.jpg
20160124_223328(1).jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks