• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

UT Pioneer Tool Rack Replacement Straps (8 different colors)

Valence

Well-known member
Steel Soldiers Supporter
2,135
605
113
Location
Davis County, UT
I make these myself.

$35 per set of 4 straps + shipping
Located in Kaysville, UT 84037

These straps are designed to replace the oft missing, damaged, or sun rotted straps on military pioneer tool racks found on many military vehicles such as M35A2 / M35A3 (deuce and a half), any of the M39, M44, M809 and M939 series trucks, and possibly Jeeps and others. Keep your tools securely mounted; you never know when you'll need them to dig out a stuck rig or dispose of a body. Not intended for life safety devices.

Features:
  • Updated: Now a set of four straps!
    • 12.5″ (31.7 cm) long (qty. 3) , 19.5″ (49.5 cm) long (qty. 1)
  • 1″ (25 mm) wide webbing.
    • MIL-W-4088: Olive Drab (OD7), Camo Green 483, Coyote, Foliage, Red, Black
      • Nylon
      • Type XVII, ~0.05″ (~1.4mm) thick, 2500 lb (~1134 kg) breaking strength webbing, resin treated for abrasion resistance.
    • Repurposed Vintage mil-spec Dark Green Cotton
      • Please note, the Dark Green Cotton was unstitched from NOS webbing gear so it will show signs of previous stitching and it has a little stretch to it.
      • 100% Cotton
      • ~0.10″ (2.5 mm) thick
      • Mildew resistant & water repellent treated.
    • MIL-W-43638: Vintage Natural color Cotton
      • 85% Cotton & 15% Fortisan
      • Type I, ~0.07″ (approx. 1.8 mm) thick, 600 lb (~272 kg) minimum breaking strength webbing
      • Low stretch
      • Mildew resistant & water repellent treated.
  • Black coated, solid brass tip, genuine mil-spec, meets MS51926B-3.
  • Mil-spec spring buckle clamp, genuine mil-spec, meets MS51929A-2.
  • Heavy, visible outdoor polyester or nylon stitching, UV resistant, anti-wick.
Made in the U.S.A. with new and military surplus U.S.A. parts.

NOTE: I do not certify nor guarantee assembled breaking strength. Webbing specifications provided for informational use only. Not intended as seat belts or life safety devices.

pioneer_tool_rack_straps_01.jpg pioneer_tool_rack_straps_02.jpg

These straps are designed to be installed on a Military Pioneer Tool Rack similar as shown below:
(click to enlarge)

pioneer_tool_rack_00.jpg pioneer_tool_rack_straps_04.jpg
 
Last edited:

Valence

Well-known member
Steel Soldiers Supporter
2,135
605
113
Location
Davis County, UT
If you'd like to save a few dollars, I still have a few of older 3-strap sets, made of slightly thinner (but still more than adequate) webbing:


pioneer_tool_rack_straps_ranger_01.jpg
Ranger

$17.50 each
qty 2 available, 2 sold

pioneer_tool_rack_straps_tan_380_01.jpg
Tan 380

$20 each
qty 1 available
  • MIL-W-17337
    • Nylon
    • 1200 lb minimum breaking strength
    • ~0.043″ (1.1 mm) thick
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks