txmytx_catahoula
New member
- 184
- 1
- 0
- Location
- Port Arthur, TX
Wait light & Water in fuel light not on at startup, then flickering while driving.
Last Monday on my M1009, the "wait" & "water in fuel " lights stopped coming on at startup. As I drove down the road, both light would flicker as I hit the smallest of bumps. At the same time, Blaze started to be hard to start after being off more than 6 hours. This weekend I started tracing the wires. Everything looked good up to the ground that connects to the right rear intake stud on the engine, the connector was broken. Blaze had been off all weekend. I repaired that ground, reconnected the battery cables, all the lights came on with the key & she started up like she'd just been run. Easy fixes are SSOOOO nice when they happen!!M
Last Monday on my M1009, the "wait" & "water in fuel " lights stopped coming on at startup. As I drove down the road, both light would flicker as I hit the smallest of bumps. At the same time, Blaze started to be hard to start after being off more than 6 hours. This weekend I started tracing the wires. Everything looked good up to the ground that connects to the right rear intake stud on the engine, the connector was broken. Blaze had been off all weekend. I repaired that ground, reconnected the battery cables, all the lights came on with the key & she started up like she'd just been run. Easy fixes are SSOOOO nice when they happen!!M