• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

weel bearings

ken

Active member
Steel Soldiers Supporter
2,479
25
38
Location
Houston Texas
Does anyone have the timkin part numbers for the inner and outer weel bearings and races? And the weel seals also. I would like to get all the parts before i tear it down. Does anyone know about how much they cost? Thanks
 

rdixiemiller

Active member
1,760
3
38
Location
Olive Branch Mississipi
If I Remember Correctly.

The races are the same, inner and outer. The outer bearing has a smaller diameter inner race, to fit the stepped spindle. That is why you can flip the hubs to run singles on the rear. When the deuce was designed, a lot of thought went into parts commonality, especially in the axle area.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks