• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What can you tell me about this brake sensor?

Vapor Trail

Well-known member
214
272
63
Location
Kentucky
Does anyone know if I can get a brake pressure reading there and what the thread pitch might be. It’s probably a brake pressure sensor but there’s no fluid in the system and it’s reading closed with a meter so it’ll be a lot easier to wire into my harness with a very common normally open sensor. In an ideal world you would say that’s a 1/8” NPT and yes it gets a full pressure reading in that location.IMG_2908.jpeg
 

NDT

Well-known member
Steel Soldiers Supporter
10,620
6,955
113
Location
Camp Wood/LC, TX
Recall what all the brake proportioning valve does. If the front or rear brake circuits become unbalanced, a piston moves which activates a switch (pictured) that causes the “brake” warning light to illuminate.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks