Rocco
New member
- 377
- 2
- 0
- Location
- Lynchburg VA
Whats the max allowable speed ? 55? for a 5 ton.
And max RPM?
And max RPM?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What??
- Thread starter Rocco
- Start date
texas-5-ton
Member
- 287
- 10
- 18
- Location
- Grandview, TX
ours will run 56 on the floor fully loaded..
Chad
Chad
I would think that RPM would dictate. Depending what size tires you run, 11s,14s,16s, etc, you can build more road speed. But the limiting factor is still rpm you run to high you hurt the motor.
You should also look at any mods that have been done to the engine, and what your carrying. Do you really wanna be running 56 mph with 30,000 pounds of stuff on a trailer. Some of the guys on here have the exprience to do it some dont. Do what you know you can do and have fun, get pics, Captain
You should also look at any mods that have been done to the engine, and what your carrying. Do you really wanna be running 56 mph with 30,000 pounds of stuff on a trailer. Some of the guys on here have the exprience to do it some dont. Do what you know you can do and have fun, get pics, Captain
acetomatoco
New member
- 2,198
- 7
- 0
Bridge trucks with the bigger rubber are, I believe marked 60 mph, but the rpm of the 6602 remains the same.
Rocco
New member
- 377
- 2
- 0
- Location
- Lynchburg VA
No mine is a 800 series 250 cummins
cbvet
Active member
- 1,567
- 20
- 38
- Location
- Northwest (Knox) Indiana
My 813 with 1400R20's runs fine at 65, But i usually travel 50-55.
Eric
CBVET
Eric
CBVET
- 9,576
- 210
- 63
- Location
- Dickson,TN
In the civilain world if you run a 855cid Cummins (which a NH250 is) above 2100 rpm she won't last long 
.
.