• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. niferous

    Ever find anything interesting hiding in your CUCV?

    One of those dollar coins the US introduced and never really caught on. I consider it a lucky coin for the vehicle. I also found a bunch of receipts for explosives. Mine came from an EOD unit in the Florida National Guard.
  2. niferous

    Door Handle Lever Printed (LMTV)

    Would making this thing beefier be an option? I have a sheet laser I could cut this out with. However, to compensate for the bend and some of the holes, it would be a good bit thicker than what I see above. The advantage to that is it would be much stronger. I could cut it out of thick...
  3. niferous

    GM Spin On Fuel Filter Conversion

    What did you do with the line that came into the bottom of the old filter?
  4. niferous

    GM Spin On Fuel Filter Conversion

    Where do I connect the fuel hose that was on the bottom of the old filter to? Or do I just cap it off? I was under the impression that was the fuel line from the tank but after reading this write up I’m wondering if I’m wrong about that and no longer need it. Thanks in advance.
  5. niferous

    Tons of M1009s in the movie Buffalo Soldiers...

    I saw it when I was in the Army. I think they actually had a good military advisor on the film. I did think it was pretty dark which is why it didn't ever make it to the theaters. Bad timing with 9/11 and it didn't present the US Army in a good light at all.
  6. niferous

    Anyone Running Smittybilts?

    I have a set and while I like the fit and how they cover the seats I do have one serious problem with them. THEY FADE VERY FAST. For a seat cover that is supposed to be designed for vehicles that are convertible you would think they would keep their color. Keep them out of the sun.
  7. niferous

    Shag carpet in M1009...from the goverment!

    OMG it's so shaggy!!!
  8. niferous

    Swing away tire carier?

    I have the factory one. Or at least it looks factory. Haven't found anyone to confirm if it was or wasn't. Have a lead on a second one and I'm going to get it for my Suburban. http://www.steelsoldiers.com/cucv/64036-rear-tire-carrier-installed-my-m1009.html
  9. niferous

    Help withInterior prep for Herculiner

    That really sucks. Good luck with the repair.
  10. niferous

    M1031 On a 2001 Dodge 2500 4x4

    It does look pretty good. Have found a few beds but they are so far away the cost of going to get it would greatly affect the price.
  11. niferous

    Running a MEP-005a in a Shed

    Sorry for the typos. I typed it up on my phone and meant to say MEP-002A. So two 5KW units.
  12. niferous

    Running a MEP-005a in a Shed

    Running a MEP-002A in a Shed I have two MEP-002A gensets that I would like to use as back-up power for my house. Currently they just sit outside with tarps covering them on concrete pads. A buddy of mine has a shed that's about 12' X 10' that he said he would like to just give me since he is...
  13. niferous

    m1031 body

    PM Sent.
  14. niferous

    M1031 On a 2001 Dodge 2500 4x4

    Are you saying you found one in South Carolina?
  15. niferous

    M1031 On a 2001 Dodge 2500 4x4

    Well that's good and I figured it would probably fit. Now where the heck can I buy one?!?! Yes I already checked the classifieds on here.
  16. niferous

    M1031 On a 2001 Dodge 2500 4x4

    So I recently bought a used Dodge Ram 2500 4x4 quad cab with the 5.9 Cummins and NV4500 transmission. The last owner was an older gentleman who drove the truck very easy. It does, however, have a lot of dents on the bed. I was looking at beds but didnt really want another regular bed on there as...
  17. niferous

    Interior Bling!

    Is the hole on the bottom of the grenade threaded at all? If so you can get an insert to go from the thread size on the bottom of the grenade to 7/16".
  18. niferous

    A couple questions about lifting and single-cab conv.

    I also would not do blocks up front. Truth be told I'm not that big of a fan of blocks on the rear axle either. On some vehicles it is needed though for so much lift. My Dodge 2500 4X4 is a good example of a truck that would just ride too rough with a solid spring pack on the rear.
  19. niferous

    Topper bolts

    OK I pulled off one of the bolts today and took it to the shop to size it. The bolts are body bolts and the size is 5/16-18 x 1. 5/16-18 x 1" Phosphate He x Head SEMS Body Bolt | Fastenal Now I just grabbed a hex head bolt and matched the washer that was on the factory bolt to a 5/16" x...
  20. niferous

    Topper bolts

    Fastenal can blow McMaster Carr out of the water on price. In fact a lot of the bolts on our MV trucks came from us. We are the main fastener supplier for Stuart and Stevenson and down at my location BAE is starting to buy more and more fasteners from us for their trucks. If you guys ever have...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks