• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. gentrysgarage

    Looking for Storage and medium duty truck mechanic in Los Angeles

    Thanks for asking, I did its 60 miles away and I can't work on it.
  2. gentrysgarage

    Need stripped singled M135 shipped Glendale CA to San Marcos TX

    Need a stripped down singled out (one rear axle) M135 tread width 73 1/4" (6.125') Wheel Base 178" (14.8') Over all lenght under 22' and I would say around 8,000ish pounds from Glendale CA to San Marcos TX . Does not run rolls and steers. Thanks
  3. gentrysgarage

    Storage/Mechanic Suggestions Los Angeles

    I had posted on the wrong page..My house is in escrow and will be needing temporary storage (3 to 6 months I hope) for my singled out M135. I am also looking for a medium duty truck mechanic to tell me why my SAE2 pull type clutch fork is 3/16" off from slipping down arount the bearing colar...
  4. gentrysgarage

    Looking for Storage and medium duty truck mechanic in Los Angeles

    My house is in escrow and will be needing temporary storage (3 to 6 months I hope) for my singled out M135. I am also looking for a medium duty truck mechanic to tell me why my SAE2 pull type clutch fork is 3/16" off from slipping down arount the bearing colar. Any help and leads appreciated...
  5. gentrysgarage

    M135 S and M Build

    Got hung up on the clutch fork not engaging the throwout bearing by 3/16 of an inch . I wasn't able to get any info as to correct or remedy the situation, nor get some of the repair shops to make a house call, So I switched to the G7123 COE and have made some progress on it though. Buuuuttttt, I...
  6. gentrysgarage

    1952 M135 W/Winch

    Looks great! How high and if you don't mind me asking how much for the roll up doors?
  7. gentrysgarage

    Axle question

    The hogsheads/center chunk will bolt up, but you would have to have custom axles made as the m135/211 axles are a little wider.
  8. gentrysgarage

    SAE 2 Clutch help....what am I doing wrong?

    Some of this has already been stated but it is easier to copy and paste from a post I just did on FB with other people trying to help me about todays adventures into the HE Double L. Of this SAE2 flywheel housing dilemma: I have the same one...now get this I have been working on getting the...
  9. gentrysgarage

    SAE 2 Clutch help....what am I doing wrong?

    Thanks WillWagner for the "insider" view there! Cummins had the pinnacle of diesel design with the 5.9 and the big brother 8.3. And I can see that they could never sell a newer inferior and more troublesome motors if they didn't sour the milk. But even the people selling the aftermarket parts...
  10. gentrysgarage

    SAE 2 Clutch help....what am I doing wrong?

    I won't be ditching the new clutch yet. I am certain the problem is the housing cover. The overused parts (with broken and stripped bolts and bolt holes) from Active Truck parts were from eBay and I specifically messaged to confirm if it worked on a 5.9 and they said yes. They would not refund...
  11. gentrysgarage

    SAE 2 Clutch help....what am I doing wrong?

    This is frustrating, It is one thing of having to buy expensive parts. Its another thing to throw hundreds of dollars away on a roll of the dice...heck I even hate quarter slots! My truck (and videos for that matter) has been stalled due to lack of money. Anybody have an SAE 2 flywheel...
  12. gentrysgarage

    SAE 2 Clutch help....what am I doing wrong?

    Thanks WillWagner for the reply. From what you said above the throwout bearing did not come uncaged so there is hope there. Do you know the minimum flywheel thickness? It wouldn't surprise me if Active Truck Parts of Colorado supplied flywheel was out of spec...everything else they sold me was...
  13. gentrysgarage

    SAE 2 Clutch help....what am I doing wrong?

    Need some help here from the bigger trucks. I have an SAE 2 dual disc, pull type, self adjusting, stamped angle spring clutch in my M135 behind a Cummins 5.9. I installed the brand new clutch with all parts facing the right direction (i.e. this face towards engine) . Installed transmission with...
  14. gentrysgarage

    Disc Brake Engineering Thread

    All right guys I am about to embark on putting the F550/B700 brakes on front the M135, and I need some help. Can someone tell me how thick the metal is on top of and on the bottom of the king pins for the caliper bracket? Secondly has anybody installed the wheel studs that were suggested in...
  15. gentrysgarage

    School me in Deuce u joints, flanges, driveshafts and balancing

    One more addendum the proper bearing caps with the sheetmetal sheild are found on the Spicer SPL70X permanently lubed ujoint.
  16. gentrysgarage

    Decision on a knuckle boom crane.

    OK if getting another flywheel housing my suggestion is 10-11 oclock position (passenger side of course) They are more readily avaiable new, but in cast iron though. Your flywheel housing motor mounts will be SUPER easy. That being said, I think you might just have enough room the back of the...
  17. gentrysgarage

    Decision on a knuckle boom crane.

    NICE! Do both outlets come straight out on the intercooler (can't really tell from the pic)? If so the Dodge Cummins truck guys will buy that from you. My intercooler and radiator are from a UPS Freightliner day cab (FL70?) and is nice and narrow for my M135 and should work great in your...
  18. gentrysgarage

    Bed mounted accessory crane location INFO

    Post this up when you do! I have 2 tubes and hubs off a Dana 70 set aside for something that seems like what you are planning!
  19. gentrysgarage

    Getting older mods

    Really similar to my build, aside from the automatic. I don't know if the auto questioned has overdrive, but I would suggest that. I would also suggest the following. If getting a Freightliner motor get it complete as I wanted to run the Bendix 550 twin cylinder compressor, but most yards...
  20. gentrysgarage

    Power steering boxes, pitman arms and donor truck years

    PS some info here: https://steelsoldiers.com/threads/ross-hf-54-conversion-question.193898/#post-2266901
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks