• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Rutjes

    Been a long time. Reinstalling head on Dads M1028, what size tap do I need for the bolt holes to run through it?

    On other 6.2/6.5 forums people have used one of the old headbolts with slots cut into them to clean the threads. Don't forget to add sealant to the studs. Some go into wet holes.
  2. Rutjes

    CUCV Serpentine Conversion

    Yes we converted to 12V. However, I have experimented with dual alternators. Designed the bracket and had it laser cut. I think I posted the file somewhere on here. If you want it I can e-mail the file. Some Googling will get you multiple examples of modified throttle cable brackets. Most do...
  3. Rutjes

    CUCV Serpentine Conversion

    Oops, I screwed up. Don't mind the dual post.
  4. Rutjes

    CUCV Serpentine Conversion

    Nice setup. Why is the vacuum pump still there? Is it because of the center mount turbo? If possible I would convert the waste-gate actuator to a mechanical one and get rid of the vacuum pump. Most of the 6.5 TD guys get rid of it because the pump is a known point of failure. They say a 1 inch...
  5. Rutjes

    Dark Seas M1008 Project

    Doesn't that go to the brake pressure switch on the proportioning valve?
  6. Rutjes

    M1031 to RV tug..

    M7? Odd choise? Very uncommon. Why not M6 or M8?
  7. Rutjes

    CUCVRUS Repair Projects

    Would this work the other way around? Would look awesome to have a MG42 mounted there :ROFLMAO: Although a M1919 would be more appropriate. I love the look of a MG42, almost bought a de-activated one a while ago, but the price held me back... Wonder how cops would react to (de-activated) M16s...
  8. Rutjes

    Rebuilding after 15 years of storage

    I'm facing the same dilemma. All rivets and bolts on the frame have been replaced with 8.8 zinc plated bolts. Do I scuff them up and paint them or not? I don't want anything to shine... Then again, the frame isn't very visible when looking at the truck once it is done... In the future I will...
  9. Rutjes

    Good Article on the Optimizer

    I don't like bringing up an old thread, but I have to ask. Hope you are still reading these forums. Did you get the date code information? There is not a lot of information about blocks cast by Dalton to be found and I just won one at an auction. I'd like to know more about it.
  10. Rutjes

    M1009 Blazer 31 Gallon Tank

    How about this tank? I put one in my M1028 chassis. I can't remember how well the skid plate fit around it. I believe it did fit, but it wasn't easy to get it back in there. If I remember I will test fit it again tomorrow. Might need some minor modifications. Maybe some spacers.
  11. Rutjes

    Where Do These Wires Go/What are They For??

    I think that plug is from the diagnostic circuit. https://www.steelsoldiers.com/threads/cucv-wiring-diagram-color-except-m1010.75505/ The last diagram, plug on the left.
  12. Rutjes

    Headlight issue

    Wow, nice lights! And Philips too. Any pictures of them installed?
  13. Rutjes

    Rebuilding after 15 years of storage

    Richard told me these don't go through the sorting machine. They go past it manually.
  14. Rutjes

    Niek's M1008

    A turbo set should not be hard to find. You might want to go for a Holset HX35 or HX40 while you're at it. Yes, stock relays are known to get stuck. We've had it happen on this truck. Though some say a well maintained stock system should not pose any issues.
  15. Rutjes

    M1031 to RV tug..

    Following this (on here and on Diesel Place). I've had a similar idea in my head ever since I had spacers cut for my friend's manifold.
  16. Rutjes

    Rebuilding after 15 years of storage

    I payed around 1100 euros total for 2 rear spring packs. I had Richard buy and ship them for me. Shipping was the biggest expense at $ 161.31 for having them shipped to Richard and another € 417.92 euros for having them shipped to the Netherlands by FedEx. We tried to find a shop that would...
  17. Rutjes

    7th Marines M1008

    The other day I came across turbos mounted somewhat like you plan to do. I believe it was on vans. Might be interesting for you to read up on that. Google it. Must've been on The Truck Stop or Diesel Place.
  18. Rutjes

    M1008

    Congrats! Welcome to the club! Good to see more CUCV owners from the other side of the pond on here. Our numbers are growing! :D
  19. Rutjes

    Rebuilding after 15 years of storage

    DS4 is computer controlled. This will not work in our trucks. A lot of newer truck owners (GMT400) actually go back to the DB2 and eliminate the computer. There are a lot of different DB2 pumps. The DB2831-4911 is considered to be the best by a lot of people if you are going to use a turbo...
  20. Rutjes

    Rebuilding after 15 years of storage

    The turbo will not add a ton of HP. I believe a 6.2 is rated 160HP or 185HP for the military version. Not sure where those 25HPs would've come from? Only difference is the EGR valve. I don't believe the EGR robs the engine of that much power? A 6.5 TD is rated at 215 HP from the factory. These...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks