Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
No, there is not 24 volts fed to the high pressure switch but if the ground circuit is open you will measure 24 volts there. It controls the fan relay which turns the fan on. It is grounded through the fording switch.
thanks and please change your font to white, black is almost impossible to read.
Sorry that does not help, and that info is not correct anyway. The 2 pin plug is just 24 volt and ground. The 4 pin plug is 12 volt illumination and 24 volt for the blower and 2 ground wires. I need to know where in...
on a 06 A1R, where is the 24 v supply that the 2 wire plug goes to? that is the orange and black wires.
I have the evaporator coil from a MRAP which is rated 33,070 BTU, the gen 2 is just a little larger so I would assume at least that rating.
Thanks, Tom
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!