Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Added pics.
had to cut out the lower corner of the RC mount to clear when installed as i had to mount them upside down so they would stick up instead of down to line up with the opening as the 3 inch body lift raised the hook hole 3 inches. By mounting them upside down they line up coming out...
Update . I know its been a bit i got busy with other projects but Iam getting pressure to get the lift freed up in the shop.
Ok so I started working on the winch and bumper set up.
Parts 12k winch with remote control and wired,
winch plate Rough country for a 1500 & 2500...
updates!
I was a bit busy today. I worked on the back tire carrier.
Next started by reinstalling the bumper reinforcement then the bumper cover. I carefully transferred and drilled the holes to allow the carrier to be bolted trough the cover.
Next had to cut the three bolts off the carrier that...
updates!
Today i got a little time to work on the back bumper, Youll notice the welded performance bumper mounting brackets that are to allow the bumper placement with the 3 inch body lift, I welded them on rather then bolt them, I really like the performance body lift the hardware is robust...
Today I worked on the rear tire mount. I started with a hummer rear tire mount as they are cheap 179 on ebay. I used a piece of C channel 1,5 X 5 inch by 48 inches long. I used it so i could mount the spare from the rear hitch but made it so i still have a hitch. Tomorrow i will attach welded...
Hi Team. A few years ago I purchased a 2013 Police tahoe with 46k on it from florida.
The plan is to make it a USMC MP looking vehicle.
I finally got time and started building it. Ill be posting many pics.
Presently
Installing a 3 inch body lift,
3.5 inch suspension lift,
just finished...