• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Wiring issue

Alphabravo

New member
13
9
3
Location
Shepherdsville, KY
I have a 2/65 M151a1 that I want to put in the solid state turn signal system. The old type box that was the original turn signsl controler is gone. The wires are still there. The original wires were marked with letters on the wires to identify which wire went where. The new solid state system wires are marked with numbers. Does anyone here have a converion chart to show which letter marked wires conects with the numbered ones. thanks
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks