• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by caldreamz

  1. C

    Anyone revert back to 24v?

    A little delay waiting for the rain to stop here in the PNW to grab some photos. ;) It all seems to be working right now but the engine compartment is a mess of wires. The batteries look like a mashup out of the junkyard. The other interesting part is a pushbutton glow plug switch in the dash -...
  2. C

    Anyone revert back to 24v?

    Hi All, Its been a while as I got sidetracked by work and some civilian K5 rebuilds. I'm considering reverting my M1009 back to 24v. The current 12v setup seems to work but I don't know anything about how it was done (and more importantly if it was done correctly!) I suppose I could pretend I...
  3. C

    Camaro seats in M1009?

    The current seat foam is still intact. I just assumed 50 year old foam could use a refresh. So, trying to get new foam before recovering the seats.
  4. C

    Camaro seats in M1009?

    Hi All, I know there are a lot of threads about seat swaps but I actually want to retain my original front seats. Just need a foam replacement and then I'll recover. I heard or saw somewhere that the M1009 seats are actually from a 80s Camaro? If so then that foam is widely available. It makes...
  5. C

    Washington M1009 (re)build thread

    Haven't posted for a while and got distracted with a civvy K5 project. Thought those of you who have talked about the starter would get a kick out of this (at my expense). I drove down to San Diego with the M1009 and all was good. Stopped off for gas on the way back and was suddenly greeted with...
  6. C

    Anybody know what this (and leaking)?

    I can believe the fuel drain (although I still think its a pretty sketchy way to cap the tube). It was a big leak and if it was differential the tube is above the differential which would indicate pressure to get it up and over and a lot of fluid loss. I'm still not sure why it would suddenly...
  7. C

    Anybody know what this (and leaking)?

    I haven't tracked that far back yet. The rain sort of killed my ambition and I didn't feel like putting on a full kit until I had more coffee :)
  8. C

    Anybody know what this (and leaking)?

    Yeah, that's my thinking too. Maybe some sort of breather tube but why would it have a plug init with a funky hose clamp?
  9. C

    Anybody know what this (and leaking)?

    Hi All, I went out to continue work on my M1009 and found a puddle under the right rear leaf springs. It seems to be coming from this but with the spill mixed with rain I can't quite get a smell to tell what it is (or maybe I'm just congested)
  10. C

    Washington M1009 (re)build thread

    If I do any more freeway driving with it like this I’ll have to invest in a pair of “brown” pants
  11. C

    Washington M1009 (re)build thread

    Ok, had a trusted mechanic look it over (formerly kept the CUCVs at Camp Pendleton running). The most immediate list is: - Two leaking injectors - Leaking output shaft - Steering gear box (the loose steering) - Lower radiator hose (the coolant leak) - Water pump (more coolant leak) - Fan clutch...
  12. C

    New Member from WA (M1009)

    Thank you for the advice. Started a new thread called "Washington M1009 (re)build thread". There's probably a way to link to it but haven't found that yet.
  13. C

    New Member from WA (M1009)

    Sadly, not a big fan of FB and closed my account a few years ago. Do you guys have another forum?
Top