-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Guyfang's latest activity
-
They are interchangeable but diffeerent It will physically fit but the CT has a different number of wire loops through it, so the... -
Guyfang replied to the thread MEP-803A Overload.I stand corrected!
-
Both S6 and S8 are involved with the Overload detection circuit. Here is a simplified circuit diagram when running 120/240 and the AM/VM...
-
Guyfang replied to the thread Gov Planet used parts.Check the SMR code. That tells you if its a recoverable Item.
-
Wow! looks like something went haywire when you uploaded your pictures! Anyway, the fitting that is broken off under the water pump is...
-
You will find a lot of posts on here about crankcase pressure, especially on the 802 where people think they have pressure based on...
-
Guyfang replied to the thread MEP-804A turns over but won't start (governor module?).What you should do is start a "parts wanted" Thread. Thats IAW the forum rules.
-
Guyfang reacted to kloppk's post in the thread MEP-804A turns over but won't start (governor module?) with
Like.
I don't have any available. I did repair a bad one for an SS member. There was a fried output transistor. -
OK i worked my way back from the secondary. as long as i kept filling it up through input elbow it would run next i blew out the...
-
Guyfang replied to the thread m923a2 fuel tank.What TM are you looking at?
-
In that case you hammer action had to have done something else to "fix" a bad connection somewhere. The fuel level sensor has absolutely...
-
Ok, so that would mean that you had 24V DC at the panel, you just couldn't start it because the low fuel fault should have been...
-
I assume you E-stop switch is pulled out and the CB-1 circuit breaker is pushed in? If you have nothing at all, no panel lights nothing...