• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by Heavymetal1985

  1. H

    New grunt from Texas.

    Thanks for the welcome guys! I hope you all are high and dry from Harvey.
  2. H

    MEP-831a help cranks won't start.

    Thanks. All the relays and K15 switch are correct. I have extra of the relays. I will try holding the fault reset in and see if the unit starts once the monsoon stops. After humping in the rain for 24 years I try and stay out of it now a days.
  3. H

    MEP-831a help cranks won't start.

    206 hours on the unit and compression lever works as intended.
  4. H

    MEP-831a help cranks won't start.

    All new along with fuel lines. I replaced it thinking I might be sucking air from somewhere.
  5. H

    MEP-831a help cranks won't start.

    That has been my thoughts! Heck it's a diesel, I have fuel, air and yes compression. Like I said I will compare the fuel flow to a running unit that I have and will follow up. One other thing is there a good way to bring the 24v battery back from who knows how long of not being charged or should...
  6. H

    MEP-831a help cranks won't start.

    Yes I get a good squirt of fuel but, I have not compared it to a running unit which I will do.
  7. H

    MEP-831a help cranks won't start.

    I have just started dealing with the MEP-831 units and so far I have had good luck with the ones I have bought but, I have one that I just can't figure out. The unit in question cranks over and puffs smoke but will not start and run. The following is a list of things I have done to the unit so...
  8. H

    MEP 831 FAQ for owners or potential buyers

    Thanks for the help I will start a new thread.
  9. H

    MEP 831 FAQ for owners or potential buyers

    Yes the governor releases plus I replaced it with one from a running unit along with the governor control. I will try and bleed the system again but I do have fuel coming from the line when it's cracked open.
  10. H

    MEP 831 FAQ for owners or potential buyers

    Question here. I have a 831 that I just pick up and can not get it started! The unit cranks over but won't run. I have checked everything on the trouble shooting guide and have replaced the following items from a good running unit injector, governor control, governor actuator, both diodes, and...
  11. H

    New grunt from Texas.

    Thanks for the add. I have read many post on the site in the past that relate to the MEP gensets and they have been very helpful. Thanks for the knowledge. i am a retired grunt 85-2009 and now I travel full time in our RV that we tow with a 2016 Western Star 5700XE class8 tractor. I buy and...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks