Recent content by hgun

I got the head lights working lol it was the loose nut between the steering wheel and seat. No turn signals yet they get brighter when turned on but no blink. I checked voltage going to the blinker flash module im getting voltage to it. I ordered a new one. Installed the rear lights, and got the...

Ok thank you

Hi guys I’m finishing up the 818. I seem to have a possible light issue. No turn signals or headlights. Now I do not have the rear lights connected is that why kinda like an open? My front markers light but don’t blink. Black out lights on markers work. But no headlights at all now I haven’t...

Hi guys I got a question will the PTO off of a M51 work on a M817? Wasn’t sure if the Multi fuel 5 tons transmission was the same as a 800 series. A friend of mines 817 the PTO broke off the transmission but he has a M51 and was curious if he could swap. I told him I would ask you guys. Thank you

I am or will be. I’m not that fat but trying to use the clutch in my 818 without turning my leg sideways to avoid hitting the steering wheel will get old quick. I had a 900 series cargo truck and had lots of leg room so I figured I would see if anyone has one. But I need to sell my 818 first...

Just curious if anyone has one they might be thinking of selling. I have to sell my M818 first so testing the waters.

I’m going to be selling my M818 W/W. I bought it a year ago and been putting it back together ever since. I found out quickly after reinstalling the driver seat I can’t operate the clutch without turning my leg sideways, because it hits the steering wheel the normal way and that’s very...

Flat Deck military trailer it’s very heavy around 5K empty I pulled it home 6hrs with a 3/4 ton truck it knew it was back there. Would make a great farm trailer. I bought it with hopes to put my SXS on it and pull it behind my Deuce. but trying to find ramps long and light enough cost more then...

Thank you US6x4 for the pic.

Good morning. I installed the In cab heater in the 818. But I can’t figure out what to power the switch too what number the TMs I looked at didn’t show it. And the old truck wires were cut. I saved what looks like a 2 way splitters from the old truck. I don’t think I can just pick one and hope...

Hi guys after watching some videos and looking at TM, I got a question about my winch I have it installed on my truck M818 minus the drive shaft. I got the engage and drum lock to move. But with the drum lock out out and lever in the engage should the drum move backwards as to wind itself in if...

Hello everyone hope everyone is staying warm. I got a question. I’m trying to remove the PTO from my parts truck, I can get most of the nuts off the studs except for one it’s right behind the transmission I can get a open end wrench on it but can’t turn it with out hitting the tranny. Do I need...

Santa brought me a cool present. Merry Christmas

Worked on taking more parts off the donor truck today. Trying to remove parts and pieces that someone or myself might need before I load it up for the local scrap yard. Merry Christmas to everyone.

Got some work done on it block heater winch controls fuel tank cleaned and reinstalled. Still have work to do lol.