Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
It's never going to be quiet but it needs to be quieter.
I have added a turbo and Jakes to my M818. The muffler was removed to make room for the turbo. The exhaust is straight through. I've had it this way almost 2 years.
I got a decibel meter to see how load it really is. I played with it...
Started working on it. Got a lot more to do. Hopefully this info will be useful to someone else too.
In using a front winch mounted behind my cab. I have to move the air lines, Pogo stick, and trailer wire connector.
I'm using some of the factory rack bracket and tying some new brackets into the...
I've had this thing for a while and haven't done too much with it.
I finally did a little work and took it camping recenty.
I took some pictures and everyone here loves pictures so I thought I'd share.
Rays Taj has been a huge inspiration as well as some other trailer and shop van conversions...
I needed a seal for my M105 master cylinder and a boot for one on my m1061.
Crossed the size to a Dorman TM5375
1-1/16" kit for a ~48 Ford F1
Seemed to fit perfectly, included everything but the spring.
I got it from Kunkel Auto Parts a Uni-select store. Was only $11.00 and they delivered it...
Anyone have the part numbers for the nylon hinge bushings that OD Iron use to sell?
Devilman had a write up that had the part numbers but I guess it didn't make it to the new site.
Pic here http://www.steelsoldiers.com/showthread.php?12684-Door-Hinge-pins
I've started painting and I would like...
Here is the publications that Allison has on the transmission that is in the 939 series trucks. I don't know if anyone had posted this already but it might be good to put in the TM section...
Was turning left and got rear ended by a 3500 Conversion van. Anybody need any parts? 11.00-20"s? winch? Engine? Got any good ideas for this thing? I don't want to scrap the good parts but can't keep it too long either.
I have a set of 24 bolt wheels and need to replace the o-rings and a few studs.
I can find the parts for the old 8 bolt and 12 bolt wheels but not the 24.
Maybe they're the same but I didn't think so.
So I'm wondering if anyone has had any experience with these or has the updated TM or parts...
Ok folks, It's our first spring rally so mark your calenders.
Spring Rally at Rausch Creek Offroad Park
April 2nd, 3rd and 4th
Rausch Creek Off Road Park
453 Molleystown Road
Tremont, PA 17981
(570) 695-3900
Post Up if your going and I'll try to keep the list updated.
Give your name, # of...
That's right, read the damn manual. It will save you alot of headaches.
Here's what happened,
I forgot, ever forget? It happened to me!
Got in my Deuce one morning headed for work. Just like every other morning for the past 2 years. Started up and ran fine. Was running on 100 % hydraulic oil...
My transfer case was acting up a few months ago and I finally got around to checking it out. Tractor pull is coming up! So it started kicking out of low and I didn't bother with it. Too cold outside. So I tried it again the other day and it wouldn't come out of Hi. I pulled the seat and floor...
Here are the dates and info for the Tractor Pulls this year at the county fair.
All are on Saturdays with the rain date being the following day (sunday)
April 25
September 18 5:00pm reg. 6:00 Pull
October 3
Registration starts at 11:00am
Pull starts at 12:00 noon
Lots of antique tractors...