• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. H

    M151 issues

    Howdy all I just recently purchased a 151 mutt. It took a lot of ether to get it started, but I figured it was because of the cold. It was 40 degrees when I first cranked it up. It really struggled. Finally got it started and was able to drive it around my yard for about 3 minutes, but I...
  2. H

    Importing from the UK

    Hi all hope you're well For a long time I've been wanting to purchase a British military vehicle. Problem is, they are hard to find in the states. A buddy of mine suggested that I file ATF Form 6 and talk with a company in the UK about importing one. Does anyone have any experience or tips on this?
  3. H

    M35A2 Winch Issues

    I have a 1968 M35A2 with the PTO winch, but the selector lever on the back side of the winch wont budge. A friend of mine mentioned that the winch clutch might be broken, hence why the lever wont move, and why the cable wont budge either. Anyone have any advice/suggestions?
  4. H

    Unusual clutch behavior on 68 M35A2

    So I'm not sure really what is going on with my trans, but it seems like my clutch is slipping. I know that's impossible as I just replaced it. It seemed to go away when I put a new fuel injection pump on it, but when I turned the throttle up for more power, the slipping came back. Usually...
  5. H

    Winch control arm on bumper stuck

    I was in a wreck last November and my winch was operating prior to wreck. Guy pulled out on red light and I hit him only going 29MPH. Now I cant pull my cable out of the drum and the lever is also stuck. Line wont go in or out. PTO shaft is spinning so its not a PTO/PTO driveshaft issue. Not...
  6. H

    M35A2 with the LDT 465 injection pump issue

    I have an M35A2 that just had a new injection pump installed. I had no problems, but noticed it was having less power output than before. I was attempting to turn the throttle up, but the adjustment screw broke off, and of course, now it wont start. Anyone know how to proceed?
  7. H

    M35A2 Transfer case mounting bracket

    I recently had to replace my transfer case in my 1968 M35A2. The replacement transfer case came with a new bracket assembly. Unfortunately, it seems that the bracket assemblies are different. Are these differences normal? If so, where can I find a replacement mount that is the same as the...
Top