Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Will 7.50X16 tires fit on a MB/GPW? I suspect that on turns or with a sagging suspension they would rub the wheelwell/fender
Anyone tried to mount these and run them?
Have a MEP002 that will not start until I turn the adjustment screw on the starter lockout switch.
Have already replaced the starter, batt, cables and lockout switch.
Referred to p 4-32 of TM5-6115-584-12 to set gap at 040 but
unable to set adjustment screw at 040 with genny running-too much...
Need assistance understanding why I have a low frequency meter reading even after I increase RPM. Thought it was low RPM and just replaced the speed control cable. Same problem. Reading is 55-56 hertz at full speed control throttle pull. Will adjust to lower RPM with speed control cable, but...
Guys,
I have a GL Hollingsworth MEP002. After performing all the system checks,reading the TM, I got it started.
The instrument readings percent output is low. Engine running at 1800 RPM. Main breaker is off.
The frequency is: 56-57 hertz but % rated is between15-20 %. Voltage is set at...
M925 is slow to start in cold weather. Cummins 250. When turning over, the exhaust stack belches blue-white smoke. Engine turns over 3-6 times with up to 3-4 attempts to start before it finally starts.
Could I have seepage back into the cylinders after turning off ignition or a cracked...
Guys,
The M923 Trans Temp guage is not working and want to start checking at the temp sensor on the transmission. Where is it located on the transmission?
Thanks