• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. G

    2003 M1123 Power steering refill.

    Because a so called expert told me that the specs of power steering fluids are far greater than any ATF. My fault for going against what my gut told me. So should I be flushing the system and adding dex V1 ATF ?
  2. G

    2003 M1123 Power steering refill.

    The first pump I removed was the earlier 107 bar version and it whined even worse than this new one. Do you think that there is any benefit in changing from the power steering fluid that I am using to the Dex V1ATF which I believe is thinner . If I have to put up with a whine I want to get it...
  3. G

    2003 M1123 Power steering refill.

    So whining is common with this style pump and not necessarily a fault ?
  4. G

    2003 M1123 Power steering refill.

    Haven`t run it long with the new pump...maybe 5 miles. Just ran the part number on the new steering pump I installed and it is the latest pump for the 6.5 TD. (120bar) The pump that should be fitted is the older version rated at 107 bar which is for 6.5 NA with 4L80E. Is it possible that the...
  5. G

    2003 M1123 Power steering refill.

    OK... fitted a new 6.5 N/A and 4L80E. Everything is fine except a whine noise coming from the Power steering system( new style with remote reservior) System is bled correctly with no leaks, air or foaming issues. I put it down to power steering pump. Fitted new pump and whine is still there...
  6. G

    Red dot wiring diagram

    Or maybe this one
  7. G

    Red dot wiring diagram

    Don`t know if this helps
  8. G

    Rubber Dog Bone Latches

    Don`t forget that there are a lot of Chinese copies of these rubbers for sale on Ebay. If you ended up with these then I`m not suprised this happened.
  9. G

    I'd like to thank everyone on Steel Soldiers for all the help and advice!

    Well if he lives in Perth then I must know him..lol Here`s the front plate if anyone is interested.
  10. G

    Cowl reinforcing plate

    Never seen that either....to me it looks like a field repair.
  11. G

    X-door refinishing

    No if`s or but`s ....do not use bondo anywhere. Only thing to use is 2 pack epoxy ( like Westsystems ) and depending on the repair with or without the micro fillers. If you can`t get the correct primer for X doors then use a 2 pack primer system that is used in the boating industry.
  12. G

    What have you done to your HMMWV today/lately

    They pop up on Ebay every now and then. Price varies from roughly $1,200 to $2, 500. They were used by the military, border patrol and marine applications. All alloy construction and waterproof. Human detection range from 10 feet to 2,400 feet
  13. G

    What have you done to your HMMWV today/lately

    I mounted an old nightsight 2000 thermal system with full 360 degree joystick operation. A bit bulky but works a treat. It`s mounted on the rh side of the roof and on the lh side I have a remote operated search light plus a bracket for the GPS antenna.
  14. G

    What have you done to your HMMWV today/lately

    I fitted mine into the base of a standard antenna mount. Just a bit of creative metalwork to the bracket and job done. Thought I would need it to make reversing a bit easier but have never turned it on...lol
  15. G

    CTIS questions

    You could go down the road of drilling your old spindles out but why would you bother when at the moment on ebay you can pick up a nos ctis spindle for less than 50 bucks each. Cost you more than that to mess about with the old ones. Then just get 4 new steering arm covers and the hub part of...
  16. G

    cable ?

    Search part number 12339420-1
  17. G

    Just some interesting variants

    http://tsahal-miniature.com/hummer.anglais.html
  18. G

    What have you done to your HMMWV today/lately

    These pics might help if you want to make your own bracket to the turret
  19. G

    Juan's M998 HMMWV

    No, there is no 12v convertor inside the box. The two main leads going into the box are marked 24v input and 12v input. It is designed for use with the Hmmwv dual amp Alternator. Hope this helps.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks