Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
4 new old stock original Spicer ctis wheel valve hose assemblies. With new diaphragms installed. Only one has a banjo bolt you will have to reuse 3 of your old ones. Dont be fooled by the chinese copies on the market with low grade hoses (that hold back your tire air). 860 shipped for the 4 of them.
Real mil DG dpa4plus usb interface with the real cat and ctis software. All you need is a decent laptop running win7 or 10. I havent tried it in 11. Only for A1 lmtv trucks. Nothing to connect to on a first gen truck. 450 shipped. You get the dpa setup as pictured and a mem stick with the...
Anyone have some tire insight driving humvee in snow and what tires they had good traction with. Lots of bfg bajas on the market anyone try these in the snow? Ive only driven mine in light snow with the older block tread goodyears wasnt horrible but not great.
Thanks
Will
I have a drash trailer its at a lumber yard in southhampton nj. They only load out wed and thurs from 9-1. I was wondering if I could pay someone in the area to pull it out for me and I could have it picked up at their place. Thanks
Will
Hi anyone interested in towbar-ing out a M1084 from Ft Drum and stashing it till I can find it a ride to CT? All 6 tires are inflated in the pics. Non euc truck so its ready to go.
Thanks
Will
On a MEP-803a I have, the injections pump fueling control arms that have the pins that sit in the fuel rack are very tight. So tight that the rack spring cant move them all the way to run position. Most small injection pumps I have seen they are loose to the point where you can shake the ip and...
Hi anyone ever separated the trans/transfer. I looked in the manuals and removed the bolts between the two. The transfer case is on there pretty good. Does anyone have any experience with this?
Thanks
Will
I have a bank of hyd controls. One control does not function. The arm moves like the others but does not have the same feel as the others in operation. The other controls that work you can feel the hyd flow as you are operating them. When you operate a working control the arm on the non working...
New to me, never had one before 007a. I thought the oil filters were the same as the 006a they seem to fit in the canister but the o rings are too small to seal the canisters to the housings. The fuel filters look like the standard older mil gen ones like the m35 uses. Anyone with any experience...
I have a M1078 in Whitehall Ohio. Non runner, driveshafts are already removed. Looking for someone who can towbar it out and stash it till Wes can get there and pick it up. Not looking for a freebie I will pay you.
will atpawnking dotcom
Have a few r22 air conditioners. I have seen a few different "drop in" replacements advertised. Saw some say you can use r407c. Not my area of expertise. Any recommendations?
Will
Have a load from Pa to CT I need picked up late this week or early next. 2 crates at the main warehouse and 2 30kws, 2 5kws and 2 air conditioners at Jays lot down the street. Around 24 feet of trailer space usually works. If anyone is interested let me know. Best contact will atpawnking dotcom...
I have a mep 816. Runs fine makes power. The pickup tube was loose when I got it. It’s a very long tube for the tank size. It seems too long to fit. Is there some magic trick I am missing?
And the start switch has aux prime and prime. Aux prime runs the only electric pump that I see in the gen...
Been working on my m1084. I can lower the outriggers and the safety sensors release the upper control bank. Then I have rotation control, cable in and out and very slow boom out. The boom comes in normal though. I don’t have any boom up function. Mast up and down is on the lower bank and that...
Have one of these pogs 10 concentrators. 15 hours on it, looks like new, marked as serviceable. Turns on starts to run but then trips it breaker. Called on site gas. They sent me the manual it’s very simple didn’t give me any insight. Anyone have any experience with these?
Have a m923a2 at Ft Meade. My regular hauler is away for a few weeks. Would like to get it off base. Looks like it was driven to where it sits. Brakes are not caged. But is a non runner and is stripped down to lower the height. So prob some water in the intake cant try to start it till its...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!