Search results

Are both plates tapped/threaded? I don’t remember from when I installed mine. If only one is tapped it would be a problem.

check time stamp 2:48, the adapter plate is installed backwards. The welds are doing all the work now instead of clamp load.

thanks for the info, I installed my cruise control and wired in the service brake discrete to the ECM, I was noticing that the pacbrake would not work while cruise control switch is on but speed is not set. I will have to go in and find those setting to change it.

It seems like driving with the 2:1 reductions hubs is like flying with your flaps down, it provides some lift benefits but it produces a lot of drag. Once it is cleaned up the airplane becomes faster but more slippery and is harder to slow down. The pac brake is less effective because the...

My hubs leak as-well, mostly from the caps, I parked on a side hill then took off the caps and put RTV to seal them better. It would be nice to know what the WTEC III CIN default shifts are set to and what limits are the adaption are. I Just fixed my PAC brake, it was not to hard, I had to...

I noticed before I changed to eco hubs, my truck would get up to temp pretty fast less than 5 min of driving at highway. Now my truck has a harder time getting up to 200 deg. I wonder if the heat production is from the transmission having to spool at such a high rpm. It would be nice to see a...

I recently installed my ECO hubs. Install, he process was pretty straight forward, removed bevel gears, retorqued spindle nut, installed split collars, installed adapter plates, then installed the hubs. The part I spent a while was trimming the snap ring for the rear axle, I used a file and a...

How does the hub nut lock without the gears? The torque is less then 20ft lbs Also the torque from the axle is transmitted through the hub splines. Looks like your design the torque is applied directly to the wheel hub gear carrier attach bolts. I would imagine the design may be strong enough...

bummer… still below the factory cruise control speed threshold.

How the the outer spindle bearing lubercated on the steer axle? Is it oil filled or grease packed?