Search results

Ohhhh ok i gotcha, i had read somewhere that you were supposed to read voltage across those 2 pins. Safe travels while you are on the road!

ok, I will double check it again Monday morning and update you on a DC reading at the top of the fuse holder. Also when we read across pins 1 and 3 of the voltage regulator we weren't really reading anything, shouldn't that be producing voltage, from the other posts I was reading I would say...

Yes I mean the quad circuit fuse, we were able to reduce the voltage of the mag pick up by just replacing it and tuning it down to 2.6 volts. However the fuse continues to blow even though with S1 held in the start position we are only getting 3.8V AC at the topside of the fuse holder and in...

blown fuse above the voltage regulator and no Hz or Voltage output shown on the panel I was actually measuring my Mag pick up after removing them from the MPU #'s 16 and 17 and I read 5.88V, is that a good thing that it's above the 2.0-3.0V or could there be something that is more underlying...