Search results

Not if your going to start it without the aid of the glow plugs. I believe you said you are going to use starting fluid. I would use the glow plugs to start it instead of starting fluid. Crack each line one at a time until the system is primed and start cranking.

Are you going to remove the glow plugs and crack the fuel injection lines to prime the fuel system up to the injectors before you try to start it?

I wouldn't use ether. This is one article of many on the website of what can happen./https://www.steelsoldiers.com/threads/m1009-starting-problems.45122/

Previous owner.

Try putting a straight edge across the pulleys and see how they plane in . The Po might have had the same issue hence the washers?

Here is a good source for supplies.https://www.boatwireusa.com/

You bolt the lug down on the battery and you connect your cables with ring terminals. If you need to disconnect the battery you don't have to disconnect the lug from the battery all the time and the lug will remain in tact forever.

https://a.co/d/doktX1v

I own one and have made all my battery connections and other type connections. You will own the tool for life. I started out making one connection and then cut it apart and the wires becomes one solid piece of material. You can not distinguish the individual wires. Great tool, you will be...

Get a Temco Hammer Lug Crimper at Amazon, buy the wire at your favorite supplier by the foot, get the copper connectors, and make your own. The Temco crimper is inexpensive and is as good a crimp as you can get. Also get the Military style battery connectors so you don't have to remove the...

TM-2320-289-34p page 28

Part # NTK EF 0074 Amazon. this is one choice, there are others.

Vacuum pump. Glow plug temperature sensor. It senses the coolant temperature and sends the signal to the control card and then sends the signal to the glow plug solenoid. Part # NTK EF 0074 Amazon...

30mm. they make a special socket to protect the return fuel line connectors. OTC detroit diesel 6.2 GM injector socket at Amazon. Pricey You can use a regular socket with care not to damage the return fuel line connectors

It's hard to tell from the picture, but if it's attached to the IP then it's you're VRC valve. It regulates the amount of vacuum from the pump to your transmission based on your throttle position.

A guy I worked for in construction had an employee who got a very small metal splinter in his eye, and they could not save his eye. Metal in the eye is no joke.

If I'm following you correctly a think that arm just makes a loop. Maybe someone can send you a template. It would seem like it would just have to be long enough for a full pump extension until it stops. It seems that longer, may not matter.

Some people on here have had success with welding those brackets. CUCVRUS comes to mind.