• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Electric coolant heater installed

cranetruck

Moderator
Super Moderator
Steel Soldiers Supporter
10,350
75
48
Location
Meadows of Dan, Virginia
Got this Calix heater from Kenny a couple of years ago, finally found a home for it.
It's 1000 Watts and coolant flows by convection as it's heated. The bottom hose is connected to a drain on the block and the top hose goes to a port by the temp sensor.
It's actually a 2000W/220VAC unit, but I plan on wiring it for 110VAC, thus the reduced wattage.
The black and red hoses in the image go to the fuel heating coil in the fuel tank.
 

Attachments

Top