LindsayMaeK
New member
- 202
- 0
- 0
- Location
- Milford, OH
If anyone has dessert requests please let me know!!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
2013 Haspin Discussion Thread
- Thread starter gimpyrobb
- Start date
gungearz
New member
- 1,719
- 4
- 0
- Location
- northwestern indiana
I can go for a 3' long strawberry zinger right about now...
Matt1970M35A
Member
- 258
- 2
- 18
- Location
- Charlestown In.
Iv got so much to do I dont know were to start. Im Installing a 2 meter radio in my dads truck and going over it. All new fluids needed check out whats making the noise in the transmission. Ive not even started on my truck. And the water Buffalo is missing a wheel yet. Also Ive not worked on a water heater yet.
Once I get started look out Ill be ready In a few day if I dont run in to any big problems.
I may just work on the water heater at haspin Im thinking of just using my coolant heater (new Never Used) as a on demand heater. Any thoughts on the water heater?
Once I get started look out Ill be ready In a few day if I dont run in to any big problems.
I may just work on the water heater at haspin Im thinking of just using my coolant heater (new Never Used) as a on demand heater. Any thoughts on the water heater?
212sparky
Well-known member
- 1,822
- 38
- 48
- Location
- Monroe/ Ohio
I will give you a hand if you need it.
Matt1970M35A
Member
- 258
- 2
- 18
- Location
- Charlestown In.
I think it will be easy. But I have never had this heater running so it may not work. I picked up a fuel pump and hose today and Im using a empty MEK can as a fuel tank. Just need to put all the parts tougher. This will be my weekend project if its raining. I still have the 3500 watt element in the water tank as a backup.
Durango_USMC
Member
- 663
- 0
- 18
- Location
- Indianapolis, IN
Managed to crack the Gen 2 alternator during a rebuild.... So just ordered a replacement. Off to inspect the vacuum lines on the transmission... and maybe I'll find some good news and just have to replace that short little vacuum hose to get the transmission to work right.
Matt1970M35A
Member
- 258
- 2
- 18
- Location
- Charlestown In.
Is it fixed ?
docfarmall
New member
- 1,947
- 26
- 0
Once again its landddddded on a big show same as in past wish you would move it up or back just a bit i miss seein yall
Durango_USMC
Member
- 663
- 0
- 18
- Location
- Indianapolis, IN
Matt,
Nope. New alternator should be here tomorrow and hopefully it wont be defective. After that all I need to do is finish off the king pins, fix the transmission, I think I can live with the oil leak for the moment. Clean and lube it all and hopefully thatll do it.
Nope. New alternator should be here tomorrow and hopefully it wont be defective. After that all I need to do is finish off the king pins, fix the transmission, I think I can live with the oil leak for the moment. Clean and lube it all and hopefully thatll do it.
gungearz
New member
- 1,719
- 4
- 0
- Location
- northwestern indiana
Lindsay... You only doin' cookies this year...? How about cupcakes...?
212sparky
Well-known member
- 1,822
- 38
- 48
- Location
- Monroe/ Ohio
For you $0.75 each she will make them. Every body else free.
gungearz
New member
- 1,719
- 4
- 0
- Location
- northwestern indiana
Cool sparky... I'm not a sweet tooth type of guy. My daughters asked cause the little bakers wanted to make some treats also.....
212sparky
Well-known member
- 1,822
- 38
- 48
- Location
- Monroe/ Ohio
I was joking, post up what you guys want and she will try to make some
gungearz
New member
- 1,719
- 4
- 0
- Location
- northwestern indiana
I know you were but seriously... These girls are talkin' some crazy shiznit. A ralley cake to feed 80 people. I had to shut it down for something more transport friendly...
212sparky
Well-known member
- 1,822
- 38
- 48
- Location
- Monroe/ Ohio
Awww come on Nathan needs a transport challenge!!
gungearz
New member
- 1,719
- 4
- 0
- Location
- northwestern indiana
Nathan already has a transport challenge... Right now... The transportation is the challenge.
Durango_USMC
Member
- 663
- 0
- 18
- Location
- Indianapolis, IN
I think I may have my trans issue fixed (crossing my fingers). Need to fix the dang king pins... the M1008 might make it after all.
augiedoggy
New member
- 503
- 13
- 0
- Location
- Cincinnati Ohio
I think you just can't go wrong with cookies. You can clamp one in your mouth while ccranking the steering
wheel on your deuce to avoid that huge water filled mud hole!
Seriously though, anything Lindsay wants to make will be scrumptious!
wheel on your deuce to avoid that huge water filled mud hole!
Seriously though, anything Lindsay wants to make will be scrumptious!
eagle4g63
Well-known member
- 1,544
- 34
- 48
- Location
- North/west Indiana
Things are looking up for my truck![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
.........I got the head gaskets on route for the LDS and also got the trailer modified and bracketed today, just need to finish welding everything up and Monday set the motor in........OH for those not in the know of my mad/sick idea that George helped me with..........I am in the process of making what I am calling my.....M.E.S 105.....Mobile Engine Stand 105
It is a engine stand that will hold a multi motor with or without the trans and be able to rebuild the motor without any worries and also hook everything back up(radiator, starter, and fuel) and fire it up and make any adjustments before installing it in the truck.......way more room and easy........plus as a bonus I can use it to either pick up motors or deliver one I have rebuilt, and let the customer hear it run.......it will bolt in using all the factory motor mounts.
I know........where are the pics???? well didn't get any today but will have some by Monday evening when I get the motor placed!!
HASPIN HERE I COME
.........I got the head gaskets on route for the LDS and also got the trailer modified and bracketed today, just need to finish welding everything up and Monday set the motor in........OH for those not in the know of my mad/sick idea that George helped me with..........I am in the process of making what I am calling my.....M.E.S 105.....Mobile Engine Stand 105It is a engine stand that will hold a multi motor with or without the trans and be able to rebuild the motor without any worries and also hook everything back up(radiator, starter, and fuel) and fire it up and make any adjustments before installing it in the truck.......way more room and easy........plus as a bonus I can use it to either pick up motors or deliver one I have rebuilt, and let the customer hear it run.......it will bolt in using all the factory motor mounts.
I know........where are the pics???? well didn't get any today but will have some by Monday evening when I get the motor placed!!
HASPIN HERE I COME
- 4,810
- 742
- 113
- Location
- Liberty Hill, SC
Well, besides the mounting bolts and a couple of other small things, the LDT and trans is ready to fly from the M109, and I went and helped AMGeneral pull my LDS and it is home, so I think I might have it done by Haspin after all.