- 10,866
- 763
- 113
- Location
- Appomattox, VA
Saw a neat M101A3 trailer at the Aberdeen show, with the HMMWV rims installed, wide fenders, etc. I forgot to take a couple pics of it. Anyone own a M101A3 that can take some closeup pics of it for me?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
closeup pics of M101A3 trailer
- Thread starter maddawg308
- Start date
drgreg
Banned
- 3,623
- 93
- 0
I've got some pictures of mine, whatcha looking for?
Attachments
indy4x4fab
Banned
- 1,711
- 41
- 0
- Location
- indy, indiana
every time i see one of these trailers i want one more and more.
Chief_919
Well-known member
- 2,050
- 103
- 63
- Location
- Western NC
I just picked up an M101A2.5
- it is a 101A2 with A3 axle and landing leg, but A2 box and wheels/tires.
Looks kinda badass with the tires hanging out. I may see what a set of dually rims looks like on it....
- it is a 101A2 with A3 axle and landing leg, but A2 box and wheels/tires.Looks kinda badass with the tires hanging out. I may see what a set of dually rims looks like on it....
- 34,012
- 1,810
- 113
- Location
- GA Mountains
Mike, if you do a little searching in the trailer forum, I know there are some pics of my trailers that I got from Jax. I know one search term would be -a3
Nonotagain
New member
- 1,444
- 41
- 0
- Location
- Parkville, MD
Mike, If it was the A3 with tarp parked a couple of spaces up from you at Aberdeen, that would have been mine.
What pics do you need or want?
Here to please.
URBNFLX
New member
- 66
- 0
- 0
- Location
- Fremont, Ca
glad i'm not the only one that uses that type of hitch setup(1st pic)... been wondering what to do with the chains though...
3dAngus
Well-known member
- 4,719
- 101
- 63
- Location
- Perry, Ga.
I've got a camo one on the classifieds. I have more pics I can send of the tires or bed or anything you need. It's right outside. If you can be more specific, I'll get you want you want or need. These are fantastic trailers and pull real nice. I love em.
Here is a couple of pics for ya, but can get you more.
Here is a couple of pics for ya, but can get you more.
Attachments
drgreg
Banned
- 3,623
- 93
- 0
The chains really need to be extended and connected to the truck. They would not be of much use if the hitch broke away.
Nonotagain
New member
- 1,444
- 41
- 0
- Location
- Parkville, MD
Angus, nice trailer.
Did you do the swap of the wheels from the 12 bolt to the 8 bolt versions or did the trailer come that way?
I'm under the impression that the 8 bolt wheels should not be used with radial tires??
Did you do the swap of the wheels from the 12 bolt to the 8 bolt versions or did the trailer come that way?
I'm under the impression that the 8 bolt wheels should not be used with radial tires??
acmunro
Member
- 532
- 4
- 18
- Location
- Reynoldsville,PA
The nice thing about the A3 is a S250 shelter will fit right in with no modifications. Or a 4x8 sheet of plywood.
3dAngus
Well-known member
- 4,719
- 101
- 63
- Location
- Perry, Ga.
It came stock that way from the military.
3dAngus
Well-known member
- 4,719
- 101
- 63
- Location
- Perry, Ga.
Yes, and side mounted over the fender wall toolboxes which are fantastic.
I got two nice ones of them coming in after the EUC clears. The toolboxes are OD while the M105 they came loaded on is desert tan. Happy as a lark here to be getting them.
- 10,866
- 763
- 113
- Location
- Appomattox, VA
Those pics will do, guys. Thanks!
number9
Member
- 455
- 0
- 18
- Location
- Lexington, KY
ChesapeakeJohnny
New member
- 14
- 0
- 1
- Location
- Eastern Shore, MD
x2 !!
therealsundance
Member
- 412
- 17
- 18
- Location
- Lutherville, MD
x3!!
3dAngus
Well-known member
- 4,719
- 101
- 63
- Location
- Perry, Ga.
OH, I screwed up (whaaaaaa...... again?)
The inner wheelwell is NOT as wide as I thought. But... I still have some dang neat toolboxes coming. I'll find a pic...
These boxes are currently on a M105.
I may put them on my M116A3 where I have access to the full wheel well.
The inner wheelwell is NOT as wide as I thought. But... I still have some dang neat toolboxes coming. I'll find a pic...
These boxes are currently on a M105.
I may put them on my M116A3 where I have access to the full wheel well.
Attachments
Last edited:
3dAngus
Well-known member
- 4,719
- 101
- 63
- Location
- Perry, Ga.
... sooooo... I have entirely to many projects going on at once now. Here is what I was thinking, without looking or measuring. My M116A3 fenders are exposed and the broader width is plentiful for the carpenters toolboxes. I am sending two pictures for the flatbed chassis of the M116A3. I hope to mount the toolboxes, inverted to open to the outside rather than like on the M105, because I plan on putting my MEP-003 Generator on this trailer next week sometime, time available. The toolboxes should make a nice addition, if I don't sell them outright. I'm darn near broke.
The next set of pics is the M101A3 with the sides. The sides cut the fender wells in half. I might have a difficult time getting these tool boxes on it, due to length and width concerns. The M1-5 is longer than the M101 so I might not be able to squeeze them inside the tailgate. Ohhhhh the HORROR!!!!
If necessary, I'll consider buying a whole new camo or OD M105. This M105 isn't going to be around long. To ugly to have in the yard. I'll probably scrap it, after saving some parts for my next and better one.
The next set of pics is the M101A3 with the sides. The sides cut the fender wells in half. I might have a difficult time getting these tool boxes on it, due to length and width concerns. The M1-5 is longer than the M101 so I might not be able to squeeze them inside the tailgate. Ohhhhh the HORROR!!!!
If necessary, I'll consider buying a whole new camo or OD M105. This M105 isn't going to be around long. To ugly to have in the yard. I'll probably scrap it, after saving some parts for my next and better one.
Attachments
Metternacht
Member
- 104
- 0
- 16
- Location
- Southern CA
I use a couple of large chain links, the type that screw open and closed on my hitch chain loops and the chains just reach and hook onto those. works great and allows me to chain the trailer for safety. I can post pic when I get home, I have to hook up to haul a load to the dump tomorrow.