skinnedknuckles
New member
- 216
- 1
- 0
- Location
- Janesville Wisconsin
NOW THATS FUNNY
Kenny I'll see whats going on here at my shop for that weekend maybe I can cruise up there in the shorty
Paul in Janesville, Wi
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Shop Day and get together
- Thread starter kennys@wi.rr.com
- Start date
Kenny I'll see whats going on here at my shop for that weekend maybe I can cruise up there in the shorty
Paul in Janesville, Wi
kennys@wi.rr.com
Active member
- 1,474
- 23
- 38
- Location
- Waukesha, WI
I'll have you know i am up and going early every day. When I redid my truck I was at the shop by 6:00 am and didn't head home until 9 to 10 pm.
I think because Tony will be here and itching to get going with his truck 8:00 should be a good time.
kennys@wi.rr.com
Active member
- 1,474
- 23
- 38
- Location
- Waukesha, WI
Paul,
It would be nice to have you with your wealth of knowledge here. Even if you do encourage Greg by laughing with him.
It would be nice to have you with your wealth of knowledge here. Even if you do encourage Greg by laughing with him.
skinnedknuckles
New member
- 216
- 1
- 0
- Location
- Janesville Wisconsin
Can I bring my BFH ?
Kenny, I believe that you can wake up early, you did when we were going to Paul Bunyuns for breakfast or was that just because food was involved?
You do kinda look like that guy from Red Green in the right light
All kidding aside hopefully they won't break too much stuff at work ,the week before, so I can make it. I wouldn't mind getting my hands dirty... oh I guess they are usually dirty anyway.
Paul in Janesville
Kenny, I believe that you can wake up early, you did when we were going to Paul Bunyuns for breakfast or was that just because food was involved?
You do kinda look like that guy from Red Green in the right light
All kidding aside hopefully they won't break too much stuff at work ,the week before, so I can make it. I wouldn't mind getting my hands dirty... oh I guess they are usually dirty anyway.
Paul in Janesville
drgreg
Banned
- 3,623
- 93
- 0
Clinto breathes through his mouth too?
dogtags
Member
- 185
- 0
- 16
- Location
- Appleton, WI
I won't be able to make this one. I hope to have the halftrack up at the National Railroad Museum's WWII Days. It just happens to be the same weekend...
But if any of you up in the Green Bay area want to come and see a great WWII event, come on over and stop in.
~Robert
But if any of you up in the Green Bay area want to come and see a great WWII event, come on over and stop in.
~Robert
toddm
New member
- 462
- 0
- 0
- Location
- Pewaukee WI
Kenny, it was nice to meet you at your shop and pick up my M105 from you. See you on the 9th. Thanks again!
kennys@wi.rr.com
Active member
- 1,474
- 23
- 38
- Location
- Waukesha, WI
Just a few days before the shop day and I thought I'd give the thread a bump as a reminder. I also wanted to point out some topics I hope to review that I have read in recent threads and have taken care of on my truck as well.
One has to do with adding a zerk to the trunion, as found in this link.
I also have to bleed the brakes on the truck that is leaving for KY after the shop day so I will be showing off my newly built power bleeder.
And of course the usual stupid talk and review of our junk. I will also have the spin on filter kits here for that truck today if all goes well. Then we can look those over and see how great they are or how much of a waste they are.
Hope to see you there and if you need directions pm me and I will guide you in.
One has to do with adding a zerk to the trunion, as found in this link.
I also have to bleed the brakes on the truck that is leaving for KY after the shop day so I will be showing off my newly built power bleeder.
And of course the usual stupid talk and review of our junk. I will also have the spin on filter kits here for that truck today if all goes well. Then we can look those over and see how great they are or how much of a waste they are.
Hope to see you there and if you need directions pm me and I will guide you in.
kennys@wi.rr.com
Active member
- 1,474
- 23
- 38
- Location
- Waukesha, WI
I talked to the guys coming up from KY and they got a slightly later start than planned. I wish them the best as they will be hitting Chicago right in the heart of rush hour now for sure. Just wanted to give the shop day one final bump before tomorrow. I spoke to a few guy who will for sure be coming out and a few more that are maybes. I think we will be starting between 7 and 8:00 tomorrow morning. Hope to see you there.
skinnedknuckles
New member
- 216
- 1
- 0
- Location
- Janesville Wisconsin
Hey Kenny,
Looks like I'll have to turn the big wrench in the morning until noon then I should be able to head up there. I've got the paver ,2 semis and a big ugly loader to work on . I'll probably just run up there in the blue Dodge.
Paul in Janesville
LOUD pipes save lives
Looks like I'll have to turn the big wrench in the morning until noon then I should be able to head up there. I've got the paver ,2 semis and a big ugly loader to work on . I'll probably just run up there in the blue Dodge.
Paul in Janesville
LOUD pipes save lives
Maverick1701
Well-known member
- 1,433
- 181
- 63
- Location
- Lubbock, TX
why cany you be closer to tx
drgreg
Banned
- 3,623
- 93
- 0
Cause then we would have to learn how to talk funny.why cany you be closer to tx
kennys@wi.rr.com
Active member
- 1,474
- 23
- 38
- Location
- Waukesha, WI
You know I was laughing at Greg's comment, then I scrolled down and wasn't laughing anymore dittle.
kennys@wi.rr.com
Active member
- 1,474
- 23
- 38
- Location
- Waukesha, WI
Works real well so far. I will find out just how well this weekend if I camp out in it.
DavidB
Active member
- 323
- 30
- 28
- Location
- Southeast Wi.
I will also be at work Saturday,sorry to miss this ,have a great and productive day.
DavidB
DavidB
drgreg
Banned
- 3,623
- 93
- 0
A lisp is not funny... Silly boy.