wheel bearing #'s help

[RAYZER]

I plan on replacing a couple of wheel bearings before my 900 mile round trip to the ga. rally, going to try miller bearing in Orlando, need the inner and outer race and bearing #,s as stamped on the parts themselve's, any help will be greatly appreciated!!

 

[doghead]

Just a couple minutes searching, found this post.

http://www.steelsoldiers.com/79940-post14.html

 

[gimpyrobb]

Yup, 3994 - 392 and the cone is 3920.

 

[Tow4]

It was cheaper to buy the bearing and race together from OD Iron. The bearing places I called around Orlando wanted more for just the bearing than the complete assembly from OD Iron.

 

[gringeltaube]

Tow4: just make sure you got US-made Timken's and not China stuff........

G.

 

[Heavysteven]

What's wrong with the old ones?

 

[ctmustang]

I just got done today replacing all bearings and races and wheel cylinders on my deuce and NAPA had everybody else beat on the bearings and they were all made in USA!
CT

 

[RAYZER]

It was cheaper to buy the bearing and race together from OD Iron. The bearing places I called around Orlando wanted more for just the bearing than the complete assembly from OD Iron.

yes, i priced them from miller and the timkens were $54.00 ea for the bearing and $17.00 ea for the race, said they can get the china ones for less, are the od iron ones made in USA?

 

[RAYZER]

What's wrong with the old ones?

on my last wheel bearing service i noticed some pitting on a couple,now is a good time to replace them.

 

[gimpyrobb]

It is good practice to at least have a spare or two on hand!

 

[RAYZER]

I just got done today replacing all bearings and races and wheel cylinders on my deuce and NAPA had everybody else beat on the bearings and they were all made in USA!
CT

Hm, i went to my local napa today and priced them,they were about the same price as od for ntc brand (something like that), the guy said they were made in the US he thought, i asked him to go check and when he came back; china.

 

[gringeltaube]

........... are the od iron ones made in USA?

Could be.... ask him, he should know!
(There is a reason for my post above....... )

G.

 

[RAYZER]

Hm, i went to my local napa today and priced them,they were about the same price as od for ntc brand (something like that), the guy said they were made in the US he thought, i asked him to go check and when he came back; china.

Could be.... ask him, he should know!
(There is a reason for my post above....... )

G.

Ah,Got ya.

 

[Heavysteven]

Any one remember the napa part number for the inner bearing tiken 3994?

 

[goldwing2000]

Oh, now you're just being lazy. www.napaonline.com

 

[steve6x6x6]

Tow4: just make sure you got US-made Timken's and not China stuff........

G.

How about $65.00 a hub, timken.

 

[goldwing2000]

How about $65.00 a hub, timken.

That sounds like a steal. Are you selling or is that a deal you found?

 

[steve6x6x6]

That sounds like a steal. Are you selling or is that a deal you found?

Been selling them for years, oh, am i going to be in trouble now.

 

[goldwing2000]

Been selling them for years, oh, am i going to be in trouble now.

Just put an ad in the classifieds and you should be a-ok.

 

[steve6x6x6]

Just put an ad in the classifieds and you should be a-ok.

Working on my 100 posts to do that.