-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
240hippie's latest activity
-
2240hippie replied to the thread No AC output MEP-802A.These are the best images I can take for this fuse and holder. No scorch, burn or discolor. There could have been a shadow in my 1 st...
-
-
2240hippie replied to the thread No AC output MEP-802A.Forgot, Still no power to lugs with the switch up.
-
2240hippie replied to the thread No AC output MEP-802A.Good Monday Morning, I have 24v, when holding the contactor switch up. Nothing when I let the switch go. I took K1 out and took apart as...
-
-
2240hippie replied to the thread No AC output MEP-802A.Great, as said when the rain stops Monday I will get back to it. I did have the K1 apart days before I found the bad connection at...
-
2240hippie replied to the thread No AC output MEP-802A.I will have to check, we have big rain right now. Probably the day or 2. I will try that 1st. Also, alot of wires have been moved around...
-
2240hippie replied to the thread No AC output MEP-802A.So I got the gen to power the conveinience plug and the ax volt gauge registers now. But I do not have power at the lugs. I have been...
-
2240hippie replied to the thread No AC output MEP-802A.I like the bullet, thats priceless.
-
2240hippie replied to the thread No AC output MEP-802A.I dont think that is "scorch" marks. When I pulled the fuse and tested it, it was very clean. NO burn marks at all. Tested the fuse out...
-
2240hippie replied to the thread No AC output MEP-802A.Okay, found bad connection at #10 block. The butt connectors did not seem tight. Gave them a sqeeze and the AC gauge now reads 115v...
-
2240hippie replied to the thread No AC output MEP-802A.I will have to try that tomorrow. Out of time today. I did forget to send pics of J5,P5. Very clean connection. Dont know the pin size...
-
-
2240hippie replied to the thread No AC output MEP-802A.So, I have the cover off the gen head. I attached pics of it. Also of the other compartments. The VR. Nothing odd with figure 10. Wires...
-
-
2240hippie replied to the thread No AC output MEP-802A.Okay, got that. The way it sounds with your "Most Likely Issues". Will I be able to get to all of these connections if I remove the main...
-
2240hippie replied to the thread No AC output MEP-802A.OKAY a break in the weather. Test h., 22.7 vdc. Test j., 14.0 vac. Test L., 24.7 vac. Test n., Yes the potentiometer does adjust...
-
2240hippie replied to the thread No AC output MEP-802A.Thank you. I will not be able to perform this today, maybe not until Monday. We have major thunderstorms on the way. Hail last night. I...
-
2240hippie replied to the thread No AC output MEP-802A.I also did the OHMS test on 7,8. Ohms between 7,8 was 1.5 ohms. Wires disconnected. While disconnected I did ohms test on terminal 7,8...
