-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
240hippie's latest activity
-
2240hippie replied to the thread No AC output MEP-802A.Standing on the trailer while this is running is, well my feet feel funny. A1 to A2 (0-VAC) B1 to B2 (2.5- VAC, C1 to C2 (24.9-VAC)...
-
2240hippie replied to the thread No AC output MEP-802A.So, When I took K1 apart. It has some small burn spots (tiny) on the 3 pull down contacts. Cleaned. I took the bottom off and the inside...
-
2240hippie replied to the thread No AC output MEP-802A.Yes. It is a sliding lock out, and not the cheap China one. This is USA made.
-
2240hippie replied to the thread No AC output MEP-802A.The lock out is a mnaul type. You have to turn off the Main for the house before you can turn on the breaker for the gnerator.
-
2240hippie replied to the thread No AC output MEP-802A.Okay, I already took it off completely. No improvement. Still nothing on the voltage gauge. Hertz is running 60 on the nose. The light...
-
2240hippie replied to the thread No AC output MEP-802A.Okay, so just remove it. Right
-
2240hippie replied to the thread No AC output MEP-802A.I attached a pic, is that the bonding strap??
-
-
2240hippie replied to the thread No AC output MEP-802A.Okay brother, were is TB1 ?? I have found TB2 which is the lug panel. Also when I find TB1, what am I looking for and what do I do?
-
2240hippie replied to the thread No AC output MEP-802A.I only have the generator supplying 120V. So it is a 3 wire. I was just informed about the bonding strip on TB1 by a dude in Germany. I...
-
2240hippie replied to the thread No AC output MEP-802A.Real Deal hook up. I will check TB1. AWG8 wire, twist lock plugs, lock out on breaker box. There always seems to be a "reference TM". I...
-
2240hippie replied to the thread No AC output MEP-802A.I know nothing about a bonding strip. Were would this be and what do I do to disconnect.??? The K1 had a couple tiny burn dots on the...
-
2240hippie replied to the thread No AC output MEP-802A.Just used it fo r my house on an outage for 7 hours. Have done alot of maintenance. Repairs when 1 st purchased of course. Mostly...
-
2240hippie replied to the thread No AC output MEP-802A.The hertz gauge is working and set at 60. Everything is working properly except the AC output. It was a month ago, it powered the house...
-
2240hippie replied to the thread No AC output MEP-802A.802a, looked thru all of you pdf's, have a manual down loaded. Not very helpful. My 802a was working just fine a month ago, had a power...
-
2240hippie replied to the thread No AC output MEP-802A.802a, looked thru all of you pdf's, have a manual down loaded. Not very helpful. My 802a was working just fine a month ago, had a power...
