2deuce's latest activity

  • 2
    2deuce replied to the thread M1008 Flat Towing Axle Removal?.
    I just flat towed my dually M1028 home. I had forgot my magnetic lights so I had my son sit in the towed CUCV and touch the brakes when...
  • 2
    2deuce replied to the thread M1008 Won't Start.
    From my experience the system works beautifully as long as all of the components are good. I have disconnected the resister thinking the...
  • 2
    2deuce replied to the thread M1028a3?.
    That is what I always thought. Probably the front is open too. I can't imagine having the front without the rear. Looks like I will be...
  • 2
    2deuce replied to the thread M1028a3?.
    I'm going to have to test mine to see if both wheels will spin. I had both rear wheels up in the air a week or so ago. If I spun one...
  • 2
    2deuce reacted to CUCVFAN's post in the thread M1028a3? with Like Like.
    The Dana70 had a Detroit Locker.
  • 2
    2deuce reacted to CUCVFAN's post in the thread M1028a3? with Like Like.
    I will say that I *suspect* there are not likely any factory versions, but I don't deal in certainties with these things anymore. Many...
  • 2
    2deuce replied to the thread M1028a3?.
    The brace in the rear corners prevents the tie down loop from twisting. My truck had make-shift anchors in the corners. I had a Marine...
  • 2
    2deuce replied to the thread M1028a3?.
    That's very interesting. That's how my truck was built. Do you remember if the rear bed corners that are also part of the tie down...
    • DSCN6013.JPG
  • 2
    2deuce reacted to 48cj2a's post in the thread M1028a3? with Like Like.
    My USAF unit did the conversion on at least 4 single rear wheel M1028s that were shelter carriers on either 84 or 85 model year trucks...
  • 2
    2deuce reacted to MTVR's post in the thread Oregon members? with Like Like.
    I am interested in learning which members are in Oregon.
  • 2
    Update. I contacted Summit about the ship date since it is September. I asked them to check on it. Since it being shipped from the...
  • 2
    2deuce replied to the thread My cucv lift.
    Seems like a lift should be in the Hot Rodding and Mods forum, and I probably will get some heat for this, but If your on the fence...
  • 2
    2deuce replied to the thread Flickering Gen 1 light.
    While this is an old post, the advice is still good, and the last post from Warthog is particularly spot on. I've had quite a few CUCV's...
  • 2
    2deuce replied to the thread M1028a3?.
    Is the truck in the pictures a dually conversion? All the M1028 were conversions with the square bodies, and I have always heard they...
  • 2
    2deuce replied to the thread M1028a3?.
    I put the bed back on, and put a shelter in it. Pictures are in the "shelter carrier hardware" thread. I was wondering why the dually...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks