• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

2Pbfeet's latest activity

  • 2
    2Pbfeet reacted to Guyfang's post in the thread MEP-114A GPU with Like Like.
    Then its not a Mode 2 set. Its a MEP-114A....................... If its 400 hertz, its a MEP-114A
  • 2
    2Pbfeet reacted to Scoobyshep's post in the thread MEP-114A GPU with Like Like.
    For everyone's sanity, the radiator is the front and the control panel is the rear. These fuel pumps are extremely simple and I...
  • 2
    2Pbfeet reacted to Guyfang's post in the thread MEP-114A GPU with Like Like.
    Are you running from the set tank? Or Aux fuel? Have you downloaded all the TM's from the TM forum here in SS? Like Scoobyshep has told...
  • 2
    2Pbfeet reacted to Scoobyshep's post in the thread MEP-114A GPU with Like Like.
    Now that I've had more caffeine, there are 2 fuel pumps plumbed in series. Then the water seperator and primary filter. This goes...
  • 2
    2Pbfeet reacted to Scoobyshep's post in the thread MEP-114A GPU with Like Like.
    Low oil will come on when the unit is placed in run (no pressure). After you start it flopping the reset switch should reset the fault...
  • 2
    2Pbfeet replied to the thread Mep 831A load issues.
    That seems like progress in a number of areas! The rewiring looks nice. Rodents can do amazing amounts of damage in such a short period...
  • 2
    2Pbfeet reacted to grywitt's post in the thread Mep 831A load issues with Like Like.
    Thank you for clarifying. I did pull out the push rods and they looked good. I didn't roll them on a flat surface. I'll keep digging in...
  • 2
    2Pbfeet replied to the thread Mep 831A load issues.
    I hear you on field work and in shop work. If you have cruddy hose, by all means replace it. My experience is that the one thing these...
  • 2
    2Pbfeet replied to the thread Mep 831A load issues.
    So, yes, that's more smoke than I would like at the loads you are adding. When you add loads, I can hear the engine respond, and it...
  • 2
    2Pbfeet reacted to FarmingSmallKubota's post in the thread Mep 831A load issues with Like Like.
    did you add the fan load of the load bank to your load amount?
  • 2
    2Pbfeet replied to the thread New member with MEP-1030.
    It might also reduce the EMI emissions from the unit.
  • 2
    2Pbfeet reacted to kloppk's post in the thread New member with MEP-1030 with Like Like.
    That is a surge suppressor for the solenoid on the starter. It's there to suppress voltage spikes from the starter solenoid when the...
  • 2
    2Pbfeet reacted to kloppk's post in the thread Mep 007b part issue with Like Like.
    This #15?
  • 2
    2Pbfeet replied to the thread Mep 007b part issue.
    Make one? It doesn't look particularly obscure or fancy. All the best, 2PbFeet
  • 2
    2Pbfeet reacted to handyjay03's post in the thread 803A Hits a Wall at 9.3kW with Like Like.
    Have an update on the injectors after getting them to a shop. It was only $15/ea to test, so I figured why not. All four had good spray...
Show older items
114,134members
167,081threads
2,352,447posts
14,445online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks