• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

2Pbfeet's latest activity

  • 2
    2Pbfeet reacted to Guyfang's post in the thread Mep 831A load issues with Like Like.
    Take a picture of the linkage unpowered, and powered up.
  • 2
    2Pbfeet reacted to Guyfang's post in the thread MEP-114A GPU with Like Like.
    Jet A1 is simply JP8 with an additive to keep moisture from freezing at high altitude. And yes, add a lubricant additive. Your gen set...
  • 2
    2Pbfeet reacted to LuckeyD's post in the thread MEP 1030A with Like Like.
    Good Day: Below is a link to Technical manuals for your generator. Several members have tried to point you to the probable issue...
  • 2
    2Pbfeet reacted to kloppk's post in the thread MEP 1030A with Like Like.
    You may want to carefully verify the DCS is being provided +24 volts to the P2 plug on the back of the DCS. B+ pins should have +24...
  • 2
    2Pbfeet reacted to DieselAddict's post in the thread MEP 1030A with Like Like.
    If you do need a DCS, Kurt has a couple available...
  • 2
    2Pbfeet reacted to kloppk's post in the thread MEP 1030A with Like Like.
    Check the fuse in the fuse/relay box to be sure the one for the DCS is there and good and that all the connectors to the fuse/relay box...
  • 2
    2Pbfeet reacted to Ray70's post in the thread 803A Hits a Wall at 9.3kW with Like Like.
    I've used a lot of ebay gasket kits and oversized Pistons from Mayi Diesel. For bearings I found Lister Petter bearings on Ebay.UK You...
  • 2
    2Pbfeet reacted to kloppk's post in the thread New member with MEP-1030 with Like Like.
    Pretty close. Here is a link to a post I did a while back with waveforms from various MEP generators. Waveforms
  • 2
    2Pbfeet replied to the thread Mep 831A load issues.
    In my book, that altitude is probably good for a ballpark 10% derate. If it were me, I would check the manual; IIRC, there's an...
  • 2
    2Pbfeet replied to the thread Mep 831A load issues.
    @grywitt If you can adjust the rocker arms, you should be ok. Part of the damage abatement on the push rods are that they compress, in...
  • 2
    2Pbfeet reacted to kloppk's post in the thread New member with MEP-1030 with Love Love.
    Here are some waveforms I took of both my local utility power and of my 1030 under a 60% load. Utility Power 2.4% THD My 1030...
  • 2
    2Pbfeet replied to the thread New member with MEP-1030.
    For generator power, it should be quite clean. What model Cotek do you have? Have you double checked voltage and frequency for what...
  • 2
    2Pbfeet reacted to Ray70's post in the thread 803A Hits a Wall at 9.3kW with Wow Wow.
    It has to come out if you plan on replacing the main bearings. It uses these split ring housings for the mains which require the crank...
  • 2
    2Pbfeet reacted to kloppk's post in the thread Valence's M116A3 Mounted MEP-803A (10kw generator) with Like Like.
    The Frequency gauge is a Current meter, not a Voltmeter. It's a 0-200 microamp gauge. So to display 60 Hz it would be supplied with...
  • 2
    2Pbfeet reacted to Ray70's post in the thread 803A Hits a Wall at 9.3kW with Like Like.
    Not to be the bearer of bad news, but cyl. looks pretty bad. Being pitted like that I suspect you have either low compression in that...
Show older items
114,125members
167,078threads
2,352,338posts
2,942online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks