Recent content by 2Wheels

This is fast approaching. If you plan tot attend shoot me a email at the address above or PM me here. Thanks! Had a great time on Saturday at this event. Thank you Em's Serious Rebuilts for coordinating and putting together this gathering. I thought I would share some pictures from the event.

My '03 A1 truck did not have the cut out in the S&S steering wheel need for self cancelling.

I agree, the perforated panels look great! Do you have a thread with more pictures of your interior? I am seeing a lot of good small details.

Welcome There are a few of us in the area I believe I did see the 419 on FB marketplace

We are planning to. It is only 45 mins. from the house :ROFLMAO:

I would recommend using a bottoming tap

496-4800 Upgraded oil pump 20R-7247 ReMan Upgraded oil pump 7W-5340 Oil Tube Gasket 3P-1156 O-ring (if you choose to replace - you will be right there anyway - 1 used on each end of the Outlet Elbow) 166-2905 Oil pan Gasket - (Some use black RTV instead of the gasket) CAT procedure actually...

The 496-4800 is the gerotor pump upgrade. My local CAT dealer is $1,767.10 for the 496-4800 & $689.13 for the 20R-7247 ReMan, ($1,026.03 core charge). Just called the parts department. If purchasing a 20R-7274 my dealer will honor cores from the 115-4123, 189-8777, & 200-4497 pumps and wave the...

Does the Columbia crew have an area where events and meetups are posted?

What if you have the core in hand, or does CAT not work like that?

At a little over 6K miles on the clock, my oil pressure drops to ~18 psi at idle when warm. I already need to reseal the oil pan. Might as well replace the 1154123 pump while I am there.

This may have been covered in the past. I came across this today while looking for a new oil pump and thought I would share. We all know know that here were upgrades to the original oil pumps in 3116, 3126, and some C7 engines. This appears to be a contributing factor. On the national Highway...

Video or it didn't happen 🤣

Video or it didn't happen 😂

~49.25" x ~16" it is for the M1240 and M1245 If you have the room you could fab up mounting brackets. 2.75 tons per hour